Any one looking for Behringer nx1000d.. jump on this deal!

[Greg Latty]

So in my search for amps for my buttkicker mini lfe, I found this deal. Used Nx1000d for $95 usd . Anyone here in the US looking for these know that they are hard to find and expensive when you do. I was skeptical because the price seems way too low. But i received mine today.. haven't done any testing but they power on so thats already a plus. They have some signs of use, but i dont care. Its sitting behind my sim rig for some buttkickers lol. Just wanted to share this great deal. Seems to be US based. Ordered mine on Saturday and got them today. Came packaged nice too. Crazy!

 

[Ruttman98]

Thank you for posting, sir! $95 + $25 shipping for me! Anxious to get a Dsp-equipped amp!

 

[Brett Horton]

I just ordered one... We'll see!
Thanks for the link
Annnnd.... ordered another one at that price!

 

[Greg Latty]

I might order another one just because..

 

[clevername]

Ordered two! GLA. Thanks!

 

[Mr Latte]

Great amp at a great price....
While I would normally recommend the 3000D model for large BK.

You can use/power large BK with these 1000D models.

Do however consider Noctua fans for much quieter running or for your sanity.
The stock fans are loud

 

[NetLawMan]

I would be worried when the condition is listed as only “Fair”

 

[Greg Latty]

These are bulk from music production companies i believe. So fair is a broad term for these. Mine came in good used condition. Apparently they were all tested and everything work. Fair is more cosmetic i think

 

[Ruttman98]

So in my search for amps for my buttkicker mini lfe, I found this deal. Used Nx1000d for $95 usd . Anyone here in the US looking for these know that they are hard to find and expensive when you do. I was skeptical because the price seems way too low. But i received mine today.. haven't done any testing but they power on so thats already a plus. They have some signs of use, but i dont care. Its sitting behind my sim rig for some buttkickers lol. Just wanted to share this great deal. Seems to be US based. Ordered mine on Saturday and got them today. Came packaged nice too. Crazy!

The brown truck (a natural gas version made by the company I work for and for which I write technical materials!) just delivered my NX1000D.

Excellent packaging and very good external condition.

Thank you again, Greg, for sharing!

 

[Greg Latty]

The brown truck (a natural gas version made by the company I work for and for which I write technical materials!) just delivered my NX1000D.

Excellent packaging and very good external condition.

Thank you again, Greg, for sharing!

glad it worked out. enjoy. I still havent connected mine yet.

 

[verysorry]

Can this be used with Dayton Audio DAEX32EP-4 exciter, or is this too powerful?

 

[Greg Latty]

Can this be used with Dayton Audio DAEX32EP-4 exciter, or is this too powerful?

its most definitely more power than you need, but This just gives you room to upgrade later on down the line if need be.

 

[Clover11]

Would this work well for a replacement of the Buttkicker amp?

 

[Greg Latty]

Would this work well for a replacement of the Buttkicker amp?

Im no expert but from what im reading these should be a big upgrade to the buttkicker. Mostly because of the higher watrage and dsp

 

[Greg Latty]

Btw i finally installed 2 of my 4 buttkickers and the amp works as intended. Im definitely going to do the fan mod. Its pretty loud. I ended up making my own cables. And went with the top quality connectors. So ya these are legit

 

[Ruttman98]

Btw i finally installed 2 of my 4 buttkickers and the amp works as intended. Im definitely going to do the fan mod. Its pretty loud. I ended up making my own cables. And went with the top quality connectors. So ya these are legit

Greg,

I have a similar cable with SpeakOns at each end which I am going to cut in half to make a cable for each of my BK Mini LFEs. How did you terminate and dress the BK end of your cables? Tinned wire or some kind of connector?

Thank you,
Chris

 

[DH73]

Hello, thanks for the head up! I just ordered and waiting for the delivery.

Could I wire one TST 239 + ButtKicker BK4-4 on each channel of this amp? My plan is to have this on a front/back setup.

Or mixing different specs of shakers of the same amp channel a bad idea? And I should really order another of these amps. ?

Cheers!

 

[Greg Latty]

Greg,

I have a similar cable with SpeakOns at each end which I am going to cut in half to make a cable for each of my BK Mini LFEs. How did you terminate and dress the BK end of your cables? Tinned wire or some kind of connector?

Thank you,
Chris

So originally was going to wire the long cable directly into the buttkicker and crimp/ heat shrink it. But i decided to give the buttkicker its own speakon connector.

Makes it easier if i ever have to move my rig or replace the buttkicker. Speakon is super easy to terminate.

I use a coupler to connect both sides.

 

[No Depth]

Purchased.

Guess I can finally move away from these mini amps I’ve been using and see what all the hype about DSP is.

 

[Brett Horton]

Hook both of mine up yesterday, all working perfectly!
Now just need to learn how to take advantage of the DSP.
I have read the forums, still do not know how to tune, meaning what to look for while tuning...