TedBrosby-
Premium
AMS2 just won't read their inputs no matter what I do.
No USB devices (and the ones connected I don't want to disconnect, so that's not a viable solution).
I've tried Custom Wheel and out of desperation, Thrustmaster or even Logitech G27, etc.
I've tried setting wheel FFB in Simucube settings to 60% overall strength and reducing the steering range to 360 degrees. Nothing. The most I get is "multiple inputs detected" when I hit the bump stop and try to turn it back slightly.
Anyone figure this out?
Solved:
Delete your Documents/Automobilista 2 folder.
After that, set your wheel to 270 degrees in Simucube program, and you will be able to map.
Make sure you set Menu spring to 0 in AMS2 menu or you won't be able to turn the wheel.
For me, good settings are:
Gain 60
Low Force Boost 0
FX 35
No USB devices (and the ones connected I don't want to disconnect, so that's not a viable solution).
I've tried Custom Wheel and out of desperation, Thrustmaster or even Logitech G27, etc.
I've tried setting wheel FFB in Simucube settings to 60% overall strength and reducing the steering range to 360 degrees. Nothing. The most I get is "multiple inputs detected" when I hit the bump stop and try to turn it back slightly.
Anyone figure this out?
Solved:
Delete your Documents/Automobilista 2 folder.
After that, set your wheel to 270 degrees in Simucube program, and you will be able to map.
Make sure you set Menu spring to 0 in AMS2 menu or you won't be able to turn the wheel.
For me, good settings are:
Gain 60
Low Force Boost 0
FX 35
Last edited:
