Could someone help me with a measurement on the P1-X?

[lovemesomespeed]

I'm trying to get some things designed for my new rig, but my P1-X is probably still 4+ weeks until delivery. I looked on Sim-Lab's schematics but it doesn't list the dimensions I need. I'm having a traction loss system made right now so I need to know a couple numbers.

Would someone be willing to measure the width of their cockpit (from the outer edge to outer edge)

as well as from the front of this bracket to the back of the chassis? (I realize this dimension is adjustable but I'm just trying to get an idea of the distance this would be in a normal scenario).

 

[lovemesomespeed]

I realize some might be concerned I'm getting these measurements to try to make my own chassis rather than purchase from Sim-Lab. Below is my confirmation email just to assure you that's not what I'm up to.

Thanks!

\

 

[Deleted member 197115]

58cm
92cm

 

[lovemesomespeed]

58cm
92cm

Thank you so much!!!

 

[Raysy]

Thank you so much!!!

You have probably worked this out already, but the second measurement is subjective. Mine is 97cm. It just depends on where you placed it for comfort.

 

[lovemesomespeed]

You have probably worked this out already, but the second measurement is subjective. Mine is 97cm. It just depends on where you placed it for comfort.

Thanks! Between your measurement and Andrew’s measurement that gives me a rough idea of where mine will end up at.

 

[DrRob]

Mine is 96cm. So pretty similar. I'm 6ft4. Pedal tray front is almost level with the longitudinal profile, seat bracket front edge almost level with the front profile of the seat-box. I use a 12cm steering shaft extension.

The good thing about the P1-X is that it can be so variable to suit your needs. At first I was quite unsure where to place the uprights longitudinally, but this came quite naturally in the build process.

Have fun building!