Heusinkveld Engineering Software needed

RobertR1 · Aug 4, 2020

I can no longer download the software off their site. I had to rebuild my OS and would like to set my pedals to exact place they were before. Anyone with a link please PM me or drop it here. Much appeicated.

Jens Roos · Aug 5, 2020

What pedal variant are you using?
The older diview is found here: http://www.leobodnar.com/files/DIView.zip

For newer pedal, smart control: https://heusinkveld.com/wp-content/uploads/HE-SmartControl-V1.0.0.zip

RobertR1 · Aug 7, 2020

Jens Roos said:
What pedal variant are you using?
The older diview is found here: http://www.leobodnar.com/files/DIView.zip

For newer pedal, smart control: https://heusinkveld.com/wp-content/uploads/HE-SmartControl-V1.0.0.zip

Sim Pedals - Calibration • Heusinkveld

heusinkveld.com

It was actually this software i was using and looking for.

DiView gives different raw readings which means I have to re-calibrate and spend time getting the same feeling. The older software was much better.

Jens Roos · Aug 7, 2020

Seen but never used that software, on my pedals Diview works very good once calibrated. I have around 20 raw units above/under my min/max points and never needs to re-calibrate. I have looked at the calibration maybe once/6 months as an validate process.

Enzo Fazzi · Aug 7, 2020

RobertR1 said:
DiView gives different raw readings

This is one of the main reasons for why we have fully dropped support for the old beta tool.

Sorry!

Enagee · Aug 27, 2022

RobertR1 said:
I can no longer download the software off their site. I had to rebuild my OS and would like to set my pedals to exact place they were before. Anyone with a link please PM me or drop it here. Much appeicated.

Did you get this sorted? i bought a pair of ultimates and stuck.