Power/Coast Ramps doesnt work in the new Formula Ultimate Gen2

[BrunoBæ]

I hope I can say this so politely that the mandatory whitewash of any critique in this sim dont start.

But even radical changes in the Power/Coast Ramps doesnt change anything in the cars behaviour.
Pic shows 3 identish setups where the only difference is that:
111960 Diff Power(26) Coast(88) Pre(50) Clutch(6)
112180 Diff Power(70) Coast(26) Pre(--) Clutch(-)
111923 Diff Power(70) Coast(88) Pre(--) Clutch(-)

Be aware that Im able to drive the car close to the edge in TT mode.
And the close 3x laptimes is some kind of proof that the car does behave identish even when you make huge changes in the Power/Coast Ramps settings.

 

[wolftree]

And the close 3x laptimes is some kind of proof that the car does behave identish even when you make huge changes in the Power/Coast Ramps settings.

It is not a proof of any such thing. At best it is a proof that your lap time on this particular track is largely independent of the differential clutch angles, probably because large parts of the lap are just flat out and the diff remains firmly closed regardless of the clutch angles used. Looking at telemetry, especially wheel RPS figures, would be a lot more informative.

 

[BrunoBæ]

It is not a proof of any such thing.

Do I have to translate "is some kind of proof" to your own language?
To show that it doesnt translate to "this is a fullblown proof".
But instead of just trying to explain it away then a serious user of this game not wanting just to whitewash such an issue could at least check it out.
Because its rather easy to feel that this RADICAL changes makes no difference.
But ok this need the driver to be able to get the car up on the edge of tire/tarmac adhesion - consistently.

CatsAreTheWorstDogs: Eventhough this is a serious ment critique then I dont want to begin to install any other telemetry tool than the real MoteC. Furthermore I know exactly what the answer to a potiential telemetry data posting will be. Because data has never made any difference for people only wanting to whitewash something.

 

[BrunoBæ]

Eventhough it supposedly is soo enormously difficult to prove that the AMS2 F-Ulti Gen2 has the above mentioned diff bug - then I made a new checkout run with the above mentioned 3x setups - but this time I changed the Clutches from 6 to 10(max).
And you know what?
No difference.
And inside a reasonable milisecs time rate I could ofcourse run the same laptimes as with clutches(6)

CatsAreTheWorstDogs: No ofcourse this doesnt prove anything - specially for people in the whitewash branch.

 

[BrunoBæ]

Just for fun checked the revised F-Ulti Gen1 out for a few laps.
Here the diff is very subtle - but I guess its probably working.

CatsAreTheWorstDogs: Hehe glad the ghost upload isnt working. So nobody can "steal" my setup.

 

[BrunoBæ]

Oh man now they have re-enabled the gamish "steal-the-fastest-drivers-setup".
Maybe because Reiza is focusing on users who "dont-give-a-sh..-learning-to-setup-a-car".