SHH Shifters and Button Boxes

[Sim Strata]

Hi guys,

Anybody with any views on SHH Shifters (https://www.shiftershh.com/en/). I fancy one of these to replace my G27 shfter.

Also, looking at one of these ebay button boxes to replace the buttons on the G27 I would loose with the SHH shifter upgade.

Any experience, yay, nay, maybe, etc?

 

[Taranta]

SHH is a 70-80s shifter style with selection grid: you have to be more precise.
Fanatec has a modern h-gearbox but I have had reliability problems.

 

[manc0ntr0]

I have an SHH for a year and a half, more or less. Very happy with it, I went from a G25 shifter and it is much better.
One advice, if you decide to buy it, go for the 6 gears + reverse grid. I have the 7 gears + reverse option and I never used the 7th gear until today because the cars who have more than 6 gears usually are sequential, nor manual gearbox

 

[Tim Meuris]

Went from a g25shifter to a css to an shh.
Best shifter feel still is css but had reliabilty issues twice (same thing) so I got fed up. Went to an shh. The feeling is better than i expected. One minor thing is that it s easy to get stuck for a very small time when shifting not 100% correctly due to the layout of the shifter plate. It gets better when u get used to it. Still the shifting feels good when done properly though. Not regretting my purchase at all. The vendor was also very helpfull. And get idd a 6+R plate.

 

[Sim Strata]

Thanks guys for the feedback, it seems like the SHH will make a good replacement with caveats noted. I'll get my order in.

 

[giulio0079]

I have an SHH for a year and a half, more or less. Very happy with it, I went from a G25 shifter and it is much better.
One advice, if you decide to buy it, go for the 6 gears + reverse grid. I have the 7 gears + reverse option and I never used the 7th gear until today because the cars who have more than 6 gears usually are sequential, nor manual gearbox

True that , I have a th8a and find here on rd a wonderful stl file for a 6 gear plus reverse , my brother printed it in pla and i've never looked back since (no more misshift from 4th to 7th , that was my main problem )