Simhub / Asetek -UGT Manager

[JohnoRacing]

Hi all , does anyone have experience of using simhub and UGT Manager together ? to they play nicely ?
I use Simhub to run all of my shakers, wind, screens etc but will need UGT Manager to run a cube controls wheel i'm looking at .
Any help would be appreciated.

 

[blekenbleu]

using simhub and UGT Manager together

Not I, but searching SimHub's support discord yielded this hit, from @pepjean 12/11/2019:
"I found out how to configure Simhub with UGT.
The developer website is not great to find this information although there
Configure Simhub to work with UGT Manager
Firmware Update
For UDP games, ie F1 2019 UGT Manager listens on the game’s default UDP.
You must change the game to output to non-standard UDP port
and then forward the UDP data with Simhub so UGT Manager will pick it up.
1) Change the following file from read only so you can save changes
\Documents\My Games\F1 2019\hardwaresettings\hardware_settings_config.xml
2) Change the following line to output to 20778 instead of 20777
<udp enabled=”true” format=”F12019” sendRate=”60” port=”20777” ip=”127.0.0.1” broadcast=”true“/>
3) Set Simhub to forward to port 20777"