Was hoping for some advice. I have attached a pic of my RIG. I am thinking I would like to put a mini (or other per advice here) on each corner of rig to represent the 4 wheels and I currently have a BK2 and amp that I was thinking to put under seat for the engine. Maybe this is not the best way to go about it but let me know what you guys think. I also have a Behringer 302 I use for my sound mixer and not sure if useful for anything with the buttkickers. I also have a 80/20 mount for the BK2 and some of the rubber feet for rig to keep the vibrations isolated to the rig.
So what I think I need is:
- 4 BK mini or other replacement for the 4 corners
- Amp and wires any other equipment that I might need power and run the these 4 Transducers
- Attachment points for the 4 shakers. I have seem some aluminum ones that mount to 80/20 along with rubber and plastic ones.
I don't have a budget but I'm not trying to spend a fortune nor am I trying to shake my fillings out. I just want some good feed back through the rig. I just didn't know with what I already have and what I need the best choice for me going forward. Im also not married to the BK2 and its amp if thats a bad option. I would say $500 is a solid number on what I would like to spend give or take. I also would like to be future proof for a while and not needing a upgrade in the near future. A motion rig is not something I will be investing in so that doesn't need to be considered.
Thanks for any help and advice. Let me know if you need more info.
