Christiaan's Pure FFB

Christiaan's Pure FFB 2.3

Login or Register an account to download this content
Great FFB File, makes Project CARS 2 perfect!
Feels great! It tell me clearly where is my grip limit. Under, over or neutral are easy to tell. The different of ffb in ndownforce level is great fun to drive.

Though I do have one issue mentioned by another Fanatec CSLe user. It induces oscillation at all speed. I tried dialing down tone to 40 as suggested, and it helped a little. At 40 tone, it took less force from my hand to dampen the oscillation. Tried zero tone, and it did not dampened the oscillation enough, while lighten the wheel. That's where I came to the compromise of the tone value at 40. Hope it will be improve, because the oscillation makes it more difficult to relax on long straight like the Mulsanne Straight, and that can lead to fatigue in stint that's longer than 2 hours.

Even with the oscillation, I still wouldn't drive without this. 13/10 would recommend. I started using this on a G25, and it transformed my old little wheel, and now with CSL DD, it just makes driving way more enjoyable.
Please fix this issue if you can, or don't, 'cause I am loving it so much already and am not driving without it either way.

Keep up the great work!
Bonjour,

J'ai peur de ne pas avoir tout bien compris. Suivant les explications ci dessous, pour régler mon TMX PRO ( courroie + engrenages ) , faut il que je divise toutes les valeurs par 2 ?

Merci d'avance



Roues jusqu'à la courroie (ex Thrustmaster T300'à Fanatec CSW v2.5) :
Gain : 100
Volume : 40 *
Tonalité : 50
FX : 0-25 **

Roues écrites par engrenages (par exemple, roues Logitech , etc.) :
Gain : 100
Volume : 50 *
Tonalité : 50
FX : 0-5 **

REMARQUE :Les fichiers FFB connectés par engrenage et roule à des incréments de volume doubles par rapport aux fichiers à entraînement direct. Par exemple 50 = 100 % de volume pour le moteur de jeu, 25 = 50 % et 100 = 200 %
The ffb with my g29 was absolutely terrible, with the g29 making loud grindy noises in PC2. No setting I tried helped.
Then bought a TS-PC. ffb in all other sims was awesome, again in PC2 the ffb was terrible. Christiaan's settings change everything - the ffb is now awesome. Thanks!
In the installation instructions it says to extract and use one of the three files according to the FFB system of my steering wheel (In my case, a Logitech G27), but the ZIP file contains only one Preset.

Does this v2.3 Preset work on all steering wheels? Or was it missing to include the other files when compressing the ZIP?
best ffb file available for csw2.5 going back to my old love pc2 cause of you

ingame 100/45/50/15

fanatec settings all on 100 and 900° drift -1 fei 70
I had tried your old versions and I liked them a lot, now that I have tried this new one is great. although I think the main problem remains the oscillations, and another thing I don't like is the "taps" it gives to the steering wheel in the straights at speed (is there any solution to remove the effect of the road rumble?). For everything else it remains excellent!
Tested on Fanatec CSL Elite.
LogiForce
LogiForce
Try to turn down Tone, which is a suspension differential between the left and right sides.
Fx is only used for engine noise and gearbox shunt.
I will soon talk with the main dev of SMS for all the Physics of the game, and hopefully resolve some issues.
Excellent work on these settings. I shaved off 30 secs on my best time around the ring on PCar2. The realism of adjusting (slight drifting) to correct yourself around high speed corners is fantastic. Thanks and keep up the good work!
4 words: The feel is amazing!!!

In the demo version of PCars 2, I wasn't happy with the feedback I was getting on my T150, it was very dull and not pronounced at all, unlike AC or RF2, where the cars feel tight and responsive.

I watched SimRacing604's video recommending this FFB file, saying some even compared this to RF2, so I bought the game and went straight ahead and installed this file. I didn't even bother using the game's preset, because I gave it a try on the demo.

I'm on my second day trying out PCars, most of the cars I've tried so far (G.C, GT1, Formula Renault etc.) were totally fine, but on the Kart, the wheel vibrates like crazy when I'm not turning the wheel. Perhaps some deadzone or minimum torque issue? I'm not quite sure how to fix it.
LogiForce
LogiForce
You can't. Those karts are broken by poor game design decisions.
A kart hasn't got suspension but rather it flexes, and controlling that flex in a kart determines its handling characteristics.
Sadly the game doesn't use a flexible chassis model but rather uses solid chassis design instead. Not impactful on modern cars with stiff chassis, but older cars and especially karts could use chassis flex.

In the end this meant they had to try some suspension geometry and setup trickery to approximate the characteristics of chassis flex. Sadly this didn't work out well, as you see.

My recommendation is to get Kartkraft for some proper karting simulation, and just use Project C.A.R.S. 2 for the rest it offers.

So it isn't due to the file, it is just that the file exposes the flaws more in those karts. Sorry. Wish I could do something about it.
So far my fav FFB, thx!
I just downloaded the zip, but there are only 2 files in it : ffb_custom_settings.txt and the changelog.
No folders.
Is that normal ?
LogiForce
LogiForce
Perfectly normal. Versions 1.X did have folder seperation to seperate different wheels, but I felt that wasn't necessary with this file.
this is just perfection!
You hit this out of the park, well done
Yes....yes.....and more yes.!!! I really wanted to enjoy this game previously, but I gave up on it with the crap FFB that caused cars to spontaneously oversteer mid-corner with no throttle input. With this FFB file the cars finally feel right. Trail braking is brilliant, inputs react more as they would in a real car, and if you screw up it still bites you in the backside.

On my CSW 2.5 and v3 pedals, it feels sublime to drive. I'm still tweaking to get it perfect for me, but I am already close after not much time. Thank you for bringing this game alive for me again!
Great FFB File, makes Project CARS 2 feel much better!
Very very nice! Finally able to increase volume without the overdone scrubbing effect of the tyres in corners. Better adjustment of road textures as well. Best FFB I tried so far. Recommended!
Outstanding.
This is the best so far. Can somebody tell me the control panel settings for t300? I have them at 75 100 100 0 0. Shal I leave them like this or default them ?
Simply the best FFB!
Best FFB settings for G29!

Latest News

Shifting method

  • I use whatever the car has in real life*

  • I always use paddleshift

  • I always use sequential

  • I always use H-shifter

  • Something else, please explain


Results are only viewable after voting.
Back
Top