1967 BRM SPARKS

Mark DENNY · Nov 15, 2021

Has anybody got any ideas as to why both the GPL 67 BRMS are sparking like they are and any ideas on how to fix this. I've only raced at 67 Silverstone and the car was AI. See attached for screen shot.

Regards

Mark

Screenshot_gpl67_brm_ks_silverstone1967_15-10-121-19-19-30 (2).jpg

AccAkut · Nov 16, 2021

Probably badly made colliders. You can check those in CM.

Pfalzdriver · Nov 16, 2021

Was my first thought too, but the collider looks (nearly) perfect for this car. Couldnt take it out for a ride tho, work is calling.

Mark DENNY · Nov 16, 2021

Thank you guys for looking into this for me. I've just driven the same car around Silverstone 67 and watched the reply no sparks so it seems that its only effecting the car when its AI ?

Mark

Cote Dazur · Nov 16, 2021

Mark DENNY said:
so it seems that its only effecting the car when its AI ?

Then it is related to settings, the Ai setting is sometime different from the driver setting, on some mods. If you look on the grid, you probably can see the AI car is much lower to the ground than yours.

Mark DENNY · Nov 16, 2021

Cote Dazur said:
Then it is related to settings, the Ai setting is sometime different from the driver setting, on some mods. If you look on the grid, you probably can see the AI car is much lower to the ground than yours.

Thank you for the reply so what setting do I need to change and where do I find it ?
Mark

Cote Dazur · Nov 16, 2021

Mark DENNY said:
Thank you for the reply so what setting do I need to change and where do I find it ?
Mark

It has been a while since I had to do that, I do not remember. Hopefully, someone with a better memory will chime in.

Mark DENNY · Nov 16, 2021

So I've just taken part in a 15 lap race driving the BRM with 36 ltrs of fuel and viewing the reply the car is sparking all over the place I did not alter any ride height or suspension settings. What's going on with this car it's driving me nuts.

Mark