Sell 2 Prosimu scn6 actuators and hardware to attach to 80/20

For sale I have 2 SCN6 actuators, control boxes and power supply. This is the system that Prosimu used to sell as an upgrade to their T1000 platform to go from a static rig to a 2dof rig. I bought the actuators and control units from them last March and took delivery of them in early April. Because this system is meant to go on their rig I had to do a little DIY to get it working on my 80/20 rig. I had a heavy duty acrylic piece made for the make so that the rig could rock from side to side and also had two mounting brackets machined out of aluminum to attach to an 80/20 rig. I 3d printed some mounting brackets to mount two of the control boxes to the rig and just used velcro to attach the remaining boxes under my pedal deck. The actuators work great and the machined aluminum plates have zero flex. I used two pipe claps at the top of the actuators just incase the aluminum had any give but realized that they were completely unnecessary. Along with this I am including an extra acrylic rocker plate (just in case) although through the use of this on my rig there were no cracks, splits or any signs of wear. The company that cut it for me made an extra and just threw it in with the one that I used. I have and will forward the email information I received from Prosimu regarding set up and wiring schematics pretty much just instructions of what plugs go where. You will need a simtools license in order to run the actuators which I believe is a one time fee. I have the license but it is non transferable. This is a great way to get into a motion rig without breaking the bank. This set up minus all the custom bits retails for 1700 from Prosimu and you would need one of their T1000 rigs to attach it to. I have done all the grunt work to get it to work with an 80/20 for you. Minus the sim tools license this is plug and play. I have two videos, one of the actuators going through their start up cycle and one of them running during a hotlap. I cannot attach videos to the for sale thread but would be more than happy to share them with interested parties.

I'm looking to get $950 obro. Buyer pays for shipping and paypal fees. Would prefer local pickup but it is all boxed and ready to go.

Cheers and thanks for looking
151348817_10221768585856439_210886404682371905_n.jpg
152444170_10221768584776412_4687758622247028859_n.jpg
152457571_10221768585256424_2936946622230359001_n.jpg
152548015_10221768585656434_7334242505008216270_n.jpg
152611846_10221768584976417_8940582499991977895_n.jpg
152613221_10221768584336401_2795282232626106358_n.jpg
152659260_10221768586176447_8297241796301279908_n.jpg
152691948_10221768584096395_8954773277338471511_n.jpg
152738980_10221768585456429_6933080200663262489_n.jpg
153228748_10221768583896390_8886697594845579110_n.jpg
 
Back
Top