Misc 2-way Traffic Layout for "Shuto Expressway C1" 0.1

[alekabul]

alekabul submitted a new resource:

2-way Traffic Layout for "Schuto Expressway C1" - The Midnight Club is out and about!

In this rare scenario Tokyo city has suffered a major damage from an earthquake and the power is out almost everywhere. Half the C1 is rendered unusable and the worried motorists are squeezed into 2-way driving on the outer ring road. Still the cool boys with their expensive toys are willing to play catch...

Install:
First you must have the "Schuto Expressway C1" track...

Read more about this resource...

 

[caforio G.]

first of all Thanks!
a question, why do cars run gray at night when I'm running?
except when they pass under lights or tunnels.
I know it is not the right post but if you know the problem .... I would be grateful

 

[alekabul]

first of all Thanks!
a question, why do cars run gray at night when I'm running?
except when they pass under lights or tunnels.
I know it is not the right post but if you know the problem .... I would be grateful

Please illustrate... In game press "F8" and look for the picture in your "Documents" - "..\Documents\Assetto Corsa\screens\" folder. Upload the "Screenshot_***.jpg" file here so I can understand what is the problem.

 

[alekabul]

alekabul updated 2-way Traffic Layout for "Shuto Expressway C1" with a new update entry:

Name change

"Schuto" ==> "Shuto"

Read the rest of this update entry...

 

[alekabul]

Good news! (And it`s not a new Dacia!) Found how to remove the brown walls blocking the sky in this track with "Weather FX", aka "Sol". Possibly same fix could help other old track mods that don`t get updated by their authors. In this post I tried to get help from real experts but not relying only on that I managed to find the fix using 3DSimED and comparing two old tracks behaving differently - "Shuto C1" and "Dorifto mountain". For this simple fix on "Shuto C1" you only need to import "c1.kn5" into 3DSimED and edit the three problematic materials with "horizon*" names.

From this:

To this:

Then after you repeated the fix for all the 3 "horizon" materials, confirm editing with the green check mark button and then it`s "File" -> "Plugin Export" -> "c1.kn5". You may want before that to change the name of the original "c1.kn5" to "-c1.kn5" (just in case...) and then save the new edited file. When the game loads normally you can delete the old one.

 

[alekabul]

Some clarification for the above procedure - @Stereo is right to propose editing mainly and only the object`s transparency. Like so:

Results in the same unblocking the sky, only even simpler a procedure. Confirmed working on "Akagi Mountain Pass". In that instance there are more than three tiles - objects which needed correction of transparency.

 

[caforio G.]

Please illustrate... In game press "F8" and look for the picture in your "Documents" - "..\Documents\Assetto Corsa\screens\" folder. Upload the "Screenshot_***.jpg" file here so I can understand what is the problem.

under the light

color working.....

under the normal sky

black and white without colors....

under partial lights

semi colored...depaind the lights on the surface....

on final,under the tunnel

full colored....like normal game...

 

[alekabul]

normal game...

Mine "SRP" v0.8 does the same. I guess it`s on purpose.

Try to get more info on how to disable it on "Shuto Revival Project" Discord channel.
I tend to like the effect and didn`t search for that info.

 

[caforio G.]

Mine "SRP" v0.8 does the same. I guess it`s on purpose.
View attachment 327482
View attachment 327481
Try to get more info on how to disable it on "Shuto Revival Project" Discord channel.
I tend to like the effect and didn`t search for that info.

OK i try to find a solution...thank's and good job!!

 

[alekabul]

If using the non-Midnight version of "Shuto C1" you can have street lights at night after placing this "c1.ini" in game`s folder "..\AssettoCorsa\extension\config\tracks\loaded\". Remove ".txt" and extract from the .7z.

 

[Stereo]

It's probably the sodium lights, they only do yellow light, not white, so anything other than yellow looks black

If it's doing it on white lights, someone copypasted the wrong light template and changed the colour.

 

[alekabul]

probably the sodium lights

So "..\AssettoCorsa\extension\config\tracks\loaded\" is the place and "shuto_revival_project_beta.ini" is the file of the config to look into, right?
"...

;////////////////////////////////
;STREET LIGHTS SERIES
;////////////////////////////////

[LIGHT_SERIES_0]
DESCRIPTION = Street Lights
ACTIVE = 1
MATERIALS = mat_lamp201_head, mat_lamp101_head, mat_lamp102_head, mat_lamp201_head, mat_lamp311_head, mat_lamp801_head, lamp2, lamp3, lamp4, lamp5, lamp6, lamp1_tunnel
DIRECTION = 0,-1,0
OFFSET = 0,1,0
RANGE = 27
SPOT = 160
SPOT_SHARPNESS = 0.8
RANGE_GRADIENT_OFFSET = 0.65
CLUSTER_THRESHOLD = 11
FADE_AT = 850
COLOR = 255, 173, 65, 0.007
SINGLE_FREQUENCY = 1
CONDITION = ALWAYS_ON
..."

If replace the "COLOR" with more balanced (in all instances) maybe it`s going to work.

 

[alekabul]

black and white without colors

Found the solution almost by accident Preparing the night mode of "Nsuka" I got the discoloration and managed to enable normal colors by editing the value of "LIGHT_SERIES_**" - "SINGLE_FREQUENCY = 0.5" in the config file. You can edit "..\AssettoCorsa\extension\config\tracks\loaded\shuto_revival_project_beta.ini" and replace every instance of "SINGLE_FREQUENCY = 1" to "SINGLE_FREQUENCY = 0.5". There are 3 such lights.
From "1" when you go smaller you get your colors back even under colored street lights.

 

[alekabul]

alekabul updated 2-way Traffic Layout for "Shuto Expressway C1" with a new update entry:

Elliminating the black flicker in tunnels with CSP enabled

In order to get the best from this track with CSP -
View attachment 357586

If someone knows the syntax for the paragraph in CSP config, please drop a line in "Discussion". This "IBL-off" needs to be set permanently or repeated each time.

Read the rest of this update entry...

 

[alekabul]

fluffyman101 - "i dont understand how to install this"

Firstly, this 7z is an add-on for the older Shuto Expressway C1 track (see the link that is in the Overview if you never played the track before). It is not for " shuto_revival_project_beta ". When you have the "..\content\tracks\c1\" you are ready to install this traffic add-on.
Better not to drop the "2-way Traffic Layout for Shuto Expressway C1.7z" onto the CM but to open it with 7-Zip File Manager, WinRAR or other archiver. Then select all 3 items from there and drop them inside the "c1" folder. Confirm the pop-up prompt to merge the "ui" folders. After that restart the CM and the traffic layout will be there to select for "Shuto".

 

[lukesprigg77]

im getting error code models_.ini when I try loading up , appreciate any help.

 

[alekabul]

error code models_.ini

Which layout and which mode?
The traffic should work ok in Track day and its "models_2way.ini" looks like this

[MODEL_0]
FILE=c1.kn5
POSITION=0,0,0
ROTATION=0,0,0

[MODEL_1]
FILE=c1_out.kn5
POSITION=0,0,0
ROTATION=0,0,0

[MODEL_2]
FILE=c1_ra.kn5
POSITION=0,0,0
ROTATION=0,0,0

[MODEL_3]
FILE=c1_r.kn5
POSITION=0,0,0
ROTATION=0,0,0

 

[Kimi Tiu]

the 2 way option dosent show up even if i followed the steps

 

[alekabul]

the 2 way option dosent show up even if i followed the steps

Try "Track day" in Content Manager or "Race Weekend" in default launcher. Check again if "ui" folder (..\content\tracks\c1\ui) has "2way' in it. If not - repeat the adding of the content by dropping all from "2-way Traffic Layout for Shuto Expressway C1.7z" into the "..\content\tracks\c1" and confirm merging of "ui" folders.

 

[Musky420]

ERROR: Reverb node does not exist:AC_REVERB_t0 , I've tried changing the audio source of this from Enabled=1 to Enabled-0 but it went down the list and pops the errorERROR: Reverb node does not exist:AC_REVERB_t1 instead....