Hello all
I am having an issue with AC/CM and shifter controllers. After rebuilding my PC I have been using my wheel's paddle shifters without issues on all types of cars, vintage or otherwise.
Because I was unable to properly use my H-Shifter (grinding, destroying the gearbox regardless of clutch use and use separate H-Shifter), I decided to try my sequential shifter for a while. I made the changes in the CM Controller section after saving a new profile and applying it to the car before going on track. Despite being recognized by CM when setting it up, once on track the sequential does not work, the paddle shifters continue to work however.
I have tried multiple profiles and remapped the shifter time and again to no avail. Any suggestions would be appreciated, primarily for sequential shifting. Thank you!
I am having an issue with AC/CM and shifter controllers. After rebuilding my PC I have been using my wheel's paddle shifters without issues on all types of cars, vintage or otherwise.
Because I was unable to properly use my H-Shifter (grinding, destroying the gearbox regardless of clutch use and use separate H-Shifter), I decided to try my sequential shifter for a while. I made the changes in the CM Controller section after saving a new profile and applying it to the car before going on track. Despite being recognized by CM when setting it up, once on track the sequential does not work, the paddle shifters continue to work however.
I have tried multiple profiles and remapped the shifter time and again to no avail. Any suggestions would be appreciated, primarily for sequential shifting. Thank you!
Last edited:
