(ACC) is it possible change the livery in the career mode?

Hi all. (ACC) is it possible change livery in the career mode? Im looking for how to make it but I dont find anything. Is it the same system of server custom liveries? if I make a new livery in custom livery ... can I use it in career mode?
 
Yes but you will have to mess around with config files.

C:\Users\EddieJordan\Documents\Assetto Corsa Competizione\Config\saveSettings.json
 
thak u so much. I supose is here

],
"carModel": "Mclaren_650s_GT3",
"cupCategory": "Overall",
"licenseType": "FullSeason",
"teamName": "Garage 59",
"nationality": "GreatBritain",
"displayName": "Garage 59",
"competitorName": "Garage 59",
"competitorNationality": "GreatBritain",
"teamTemplateKey": 31,
"auxLightKey": 1,
"auxLightColor": 237,
"skinTemplateKey": 100,
"customSkinName": "",
"skinColor1Id": 345,
"skinMaterialType1": "2",
"skinColor2Id": 249,
"skinMaterialType2": "0",
"skinColor3Id": 249,
"skinMaterialType3": "0",
"sponsorId": 16,
"rimColor1Id": 345,
"rimMaterialType1": "2",
"rimColor2Id": 249,
"rimMaterialType2": "1",
"bannerTemplateKey": 1,
"contentId": "MainGame",
"isPriority": false
 
Never mind worked it out,, in case anyone need this..only change the blue lines, to correspond with the car skin file your using.

20201103133447_1.jpg



"carInfo":
{
"carGuid": 0,
"teamGuid": 0,
"raceNumber": 2,
"raceNumberPadding": 0,
"isCustom": true,
"bUsable": true,
"isMP": true,
"sprintCupValid": false,
"enduranceCupValid": true,
"fullCupValid": false,
"canSelectOfficialTemplate": false,
"canSelectCustomTemplate": false,
"allowAsOpponentInFreeModes": true,
"carRaceEventType": [
"A_3H",
"C_6H",
"B_24H",
"Free"
],
"carModel": "Porsche_991_GT3_R",
"cupCategory": "Overall",
"licenseType": "FullSeason",
"teamName": "Gigaspeed Team Getspeed",
"nationality": "Australia",
"displayName": "Gigaspeed Team Getspeed",
"competitorName": "Gigaspeed Team Getspeed",
"competitorNationality": "Australia",
"teamTemplateKey": 0,
"auxLightKey": 2,
"auxLightColor": 162,
"skinTemplateKey": 100,
"customSkinName": "Gigaspeed_Team_Getspeed_2018",
"skinColor1Id": 344,
"skinMaterialType1": "1",
"skinColor2Id": 344,
"skinMaterialType2": "1",
"skinColor3Id": 344,
"skinMaterialType3": "1",
"sponsorId": 0,
"rimColor1Id": 344,
"rimMaterialType1": "2",
"rimColor2Id": 344,
"rimMaterialType2": "2",
"bannerTemplateKey": 2,
"contentId": "MainGame",
"isPriority": true
 
Last edited:
Are you really Eddie Jordan???
thank you for your answer, but i tested it that way, and it dont work.
I downloaded my favorite livery and installed it in custom livery and custom cars. When I have a look ingame, i can see and use my car.

But in carrier it dont work. I opend the saveSettings data, and wrote all the details from my livery inside. Saved and restart game. Dont work, still the old boring carrier car. :(
 
Never mind worked it out,, in case anyone need this..only change the blue lines, to correspond with the car skin file your using.

View attachment 417526


"carInfo":
{
"carGuid": 0,
"teamGuid": 0,
"raceNumber": 2,
"raceNumberPadding": 0,
"isCustom": true,
"bUsable": true,
"isMP": true,
"sprintCupValid": false,
"enduranceCupValid": true,
"fullCupValid": false,
"canSelectOfficialTemplate": false,
"canSelectCustomTemplate": false,
"allowAsOpponentInFreeModes": true,
"carRaceEventType": [
"A_3H",
"C_6H",
"B_24H",
"Free"
],
"carModel": "Porsche_991_GT3_R",
"cupCategory": "Overall",
"licenseType": "FullSeason",
"teamName": "Gigaspeed Team Getspeed",
"nationality": "Australia",
"displayName": "Gigaspeed Team Getspeed",
"competitorName": "Gigaspeed Team Getspeed",
"competitorNationality": "Australia",
"teamTemplateKey": 0,
"auxLightKey": 2,
"auxLightColor": 162,
"skinTemplateKey": 100,
"customSkinName": "Gigaspeed_Team_Getspeed_2018",
"skinColor1Id": 344,
"skinMaterialType1": "1",
"skinColor2Id": 344,
"skinMaterialType2": "1",
"skinColor3Id": 344,
"skinMaterialType3": "1",
"sponsorId": 0,
"rimColor1Id": 344,
"rimMaterialType1": "2",
"rimColor2Id": 344,
"rimMaterialType2": "2",
"bannerTemplateKey": 2,
"contentId": "MainGame",
"isPriority": true
Doesn´t work for me either. It won´t even change the raceNumber on my car after changing it in the config.
Are we missing something else or is it really just this config file? The custom skin i want to use works completly fine in any other singleplayer session.
 
OK.. Yes you can use Custom liveries for Career Mode:

20210626091944_1.jpg

3 files need to be adjusted
saveSettings.json C:\Users\Fred\Documents\Assetto Corsa Competizione\Config
1SE.json C:\Users\Fred\Documents\Assetto Corsa Competizione\Savegames
1H.json C:\Users\Fred\Documents\Assetto Corsa Competizione\Savegames

Change this in the saveSettings.json

"carInfo":
{
"carGuid": 0,
"teamGuid": 0,
"raceNumber": 46,
"raceNumberPadding": 0,
"isCustom": true,
"bUsable": true,
"isMP": true,
"sprintCupValid": false,
"enduranceCupValid": true,
"fullCupValid": false,
"canSelectOfficialTemplate": false,
"canSelectCustomTemplate": false,
"allowAsOpponentInFreeModes": true,
"carRaceEventType": [
"A_3H",
"C_6H"
],
"carModel": "Aston_Martin_Vantage_V12_GT3",
"cupCategory": "Overall",
"licenseType": "FullSeason",
"teamName": "R.T. Smoke House",
"nationality": "Switzerland",
"displayName": "R.T. Smoke House",
"competitorName": "R-Motorsport",
"competitorNationality": "Switzerland",
"teamTemplateKey": 0,
"auxLightKey": 0,
"auxLightColor": 341,
"skinTemplateKey": 101,
"customSkinName": "RTSH_Aston_V12",
"skinColor1Id": 178,
"skinMaterialType1": "0",
"skinColor2Id": 117,
"skinMaterialType2": "4",
"skinColor3Id": 117,
"skinMaterialType3": "4",
"sponsorId": 0,
"rimColor1Id": 1,
"rimMaterialType1": "3",
"rimColor2Id": 178,
"rimMaterialType2": "1",
"bannerTemplateKey": 0,
"contentId": "MainGame",
"isPriority": true



Change this in the 1SE.json and 1H.json


"car":
{
"carGuid": 0,
"teamGuid": 0,
"raceNumber": 46,
"raceNumberPadding": 0,
"isCustom": true,
"bUsable": true,
"isMP": true,
"sprintCupValid": false,
"enduranceCupValid": false,
"fullCupValid": false,
"canSelectOfficialTemplate": false,
"canSelectCustomTemplate": true,
"allowAsOpponentInFreeModes": true,
"carRaceEventType": [],
"carModel": "Aston_Martin_Vantage_V12_GT3",
"cupCategory": "Overall",
"licenseType": "FullSeason",
"teamName": "R.T. Smoke House",
"nationality": "Switzerland",
"displayName": "R.T. Smoke House",
"competitorName": "R-Motorsport",
"competitorNationality": "Switzerland",
"teamTemplateKey": 0,
"auxLightKey": 0,
"auxLightColor": 341,
"skinTemplateKey": 101,
"customSkinName": "RTSH_Aston_V12",
"skinColor1Id": 178,
"skinMaterialType1": "0",
"skinColor2Id": 117,
"skinMaterialType2": "4",
"skinColor3Id": 117,
"skinMaterialType3": "4",
"sponsorId": 0,
"rimColor1Id": 1,
"rimMaterialType1": "3",
"rimColor2Id": 178,
"rimMaterialType2": "1",
"bannerTemplateKey": 0,
"contentId": "MainGame",
"isPriority": false
 
OK.. Yes you can use Custom liveries for Career Mode:

View attachment 484013
3 files need to be adjusted
saveSettings.json C:\Users\Fred\Documents\Assetto Corsa Competizione\Config
1SE.json C:\Users\Fred\Documents\Assetto Corsa Competizione\Savegames
1H.json C:\Users\Fred\Documents\Assetto Corsa Competizione\Savegames

Change this in the saveSettings.json

"carInfo":
{
"carGuid": 0,
"teamGuid": 0,
"raceNumber": 46,
"raceNumberPadding": 0,
"isCustom": true,
"bUsable": true,
"isMP": true,
"sprintCupValid": false,
"enduranceCupValid": true,
"fullCupValid": false,
"canSelectOfficialTemplate": false,
"canSelectCustomTemplate": false,
"allowAsOpponentInFreeModes": true,
"carRaceEventType": [
"A_3H",
"C_6H"
],
"carModel": "Aston_Martin_Vantage_V12_GT3",
"cupCategory": "Overall",
"licenseType": "FullSeason",
"teamName": "R.T. Smoke House",
"nationality": "Switzerland",
"displayName": "R.T. Smoke House",
"competitorName": "R-Motorsport",
"competitorNationality": "Switzerland",
"teamTemplateKey": 0,
"auxLightKey": 0,
"auxLightColor": 341,
"skinTemplateKey": 101,
"customSkinName": "RTSH_Aston_V12",
"skinColor1Id": 178,
"skinMaterialType1": "0",
"skinColor2Id": 117,
"skinMaterialType2": "4",
"skinColor3Id": 117,
"skinMaterialType3": "4",
"sponsorId": 0,
"rimColor1Id": 1,
"rimMaterialType1": "3",
"rimColor2Id": 178,
"rimMaterialType2": "1",
"bannerTemplateKey": 0,
"contentId": "MainGame",
"isPriority": true



Change this in the 1SE.json and 1H.json


"car":
{
"carGuid": 0,
"teamGuid": 0,
"raceNumber": 46,
"raceNumberPadding": 0,
"isCustom": true,
"bUsable": true,
"isMP": true,
"sprintCupValid": false,
"enduranceCupValid": false,
"fullCupValid": false,
"canSelectOfficialTemplate": false,
"canSelectCustomTemplate": true,
"allowAsOpponentInFreeModes": true,
"carRaceEventType": [],
"carModel": "Aston_Martin_Vantage_V12_GT3",
"cupCategory": "Overall",
"licenseType": "FullSeason",
"teamName": "R.T. Smoke House",
"nationality": "Switzerland",
"displayName": "R.T. Smoke House",
"competitorName": "R-Motorsport",
"competitorNationality": "Switzerland",
"teamTemplateKey": 0,
"auxLightKey": 0,
"auxLightColor": 341,
"skinTemplateKey": 101,
"customSkinName": "RTSH_Aston_V12",
"skinColor1Id": 178,
"skinMaterialType1": "0",
"skinColor2Id": 117,
"skinMaterialType2": "4",
"skinColor3Id": 117,
"skinMaterialType3": "4",
"sponsorId": 0,
"rimColor1Id": 1,
"rimMaterialType1": "3",
"rimColor2Id": 178,
"rimMaterialType2": "1",
"bannerTemplateKey": 0,
"contentId": "MainGame",
"isPriority": false
Thank you for your help.
But i do not have the other .json files in my documents folder
 
OK.. Yes you can use Custom liveries for Career Mode:

View attachment 484013
3 files need to be adjusted
saveSettings.json C:\Users\Fred\Documents\Assetto Corsa Competizione\Config
1SE.json C:\Users\Fred\Documents\Assetto Corsa Competizione\Savegames
1H.json C:\Users\Fred\Documents\Assetto Corsa Competizione\Savegames

Change this in the saveSettings.json

"carInfo":
{
"carGuid": 0,
"teamGuid": 0,
"raceNumber": 46,
"raceNumberPadding": 0,
"isCustom": true,
"bUsable": true,
"isMP": true,
"sprintCupValid": false,
"enduranceCupValid": true,
"fullCupValid": false,
"canSelectOfficialTemplate": false,
"canSelectCustomTemplate": false,
"allowAsOpponentInFreeModes": true,
"carRaceEventType": [
"A_3H",
"C_6H"
],
"carModel": "Aston_Martin_Vantage_V12_GT3",
"cupCategory": "Overall",
"licenseType": "FullSeason",
"teamName": "R.T. Smoke House",
"nationality": "Switzerland",
"displayName": "R.T. Smoke House",
"competitorName": "R-Motorsport",
"competitorNationality": "Switzerland",
"teamTemplateKey": 0,
"auxLightKey": 0,
"auxLightColor": 341,
"skinTemplateKey": 101,
"customSkinName": "RTSH_Aston_V12",
"skinColor1Id": 178,
"skinMaterialType1": "0",
"skinColor2Id": 117,
"skinMaterialType2": "4",
"skinColor3Id": 117,
"skinMaterialType3": "4",
"sponsorId": 0,
"rimColor1Id": 1,
"rimMaterialType1": "3",
"rimColor2Id": 178,
"rimMaterialType2": "1",
"bannerTemplateKey": 0,
"contentId": "MainGame",
"isPriority": true



Change this in the 1SE.json and 1H.json


"car":
{
"carGuid": 0,
"teamGuid": 0,
"raceNumber": 46,
"raceNumberPadding": 0,
"isCustom": true,
"bUsable": true,
"isMP": true,
"sprintCupValid": false,
"enduranceCupValid": false,
"fullCupValid": false,
"canSelectOfficialTemplate": false,
"canSelectCustomTemplate": true,
"allowAsOpponentInFreeModes": true,
"carRaceEventType": [],
"carModel": "Aston_Martin_Vantage_V12_GT3",
"cupCategory": "Overall",
"licenseType": "FullSeason",
"teamName": "R.T. Smoke House",
"nationality": "Switzerland",
"displayName": "R.T. Smoke House",
"competitorName": "R-Motorsport",
"competitorNationality": "Switzerland",
"teamTemplateKey": 0,
"auxLightKey": 0,
"auxLightColor": 341,
"skinTemplateKey": 101,
"customSkinName": "RTSH_Aston_V12",
"skinColor1Id": 178,
"skinMaterialType1": "0",
"skinColor2Id": 117,
"skinMaterialType2": "4",
"skinColor3Id": 117,
"skinMaterialType3": "4",
"sponsorId": 0,
"rimColor1Id": 1,
"rimMaterialType1": "3",
"rimColor2Id": 178,
"rimMaterialType2": "1",
"bannerTemplateKey": 0,
"contentId": "MainGame",
"isPriority": false
Worked great! Thank you!
 
Doesn´t work for me either. It won´t even change the raceNumber on my car after changing it in the config.
Are we missing something else or is it really just this config file? The custom skin i want to use works completly fine in any other singleplayer session.
Look carefully, for me the "ispriority" was in "false" and is not highlighted in blue in the guide. Change it to "true". I had the same issue and that line was the problem.
 
Back
Top