Adding mass when switch on an assist.

[Dian Kostadinov]

How i can adding mass in the game, ex. without assists the car weights 600 kg and in the middle of the race I decide to switch on Traction, the car must happen 610 kg. Is this possible in rFactor. Thank you.

 

[Ole Marius Myrvold]

I do belive this is automatic.

 

[Dian Kostadinov]

Didn't understand... where is that settings, wanna change kilos, asissts and etc. Thnks.

 

[R Soul]

Weight penalties seem to be defined in the .hdv file for each car.
There is an [aidpenalties] section. I imagine the figures are precentages. Some aids are just on or off and others are off, low, medium and high so they have four values.

edit: Here are the values for the BMW F1 car:
[AIDPENALTIES]
TC=(0.00,0.00,0.00) // Weight penalties for using different
ABS=(0.000,0.005,0.010) // levels of aids. First value is typically
Stability=(0.000,0.005,0.010) // with the aid off so it should be 0.0.
Autoshift=(0.00,0.00,0.00,0.00) // Penalties should only be applied to
Steering=(0.000,0.005,0.008,0.020) // aids that the vehicle would not be
Braking=(0.00,0.00,0.00) // allowed to run with. Penalties should
Invulnerable=(0.00,0.00) // typically only be used if the aid improves
Opposite=(0.00,0.00) // laptimes for a decent driver.
SpinRecovery=(0.00,0.00) // Values are fractions of the total vehicle
AutoPit=(0.00,0.00) // mass, and are modeled as extra weight in
AutoLift=(0.00,0.00) // the fuel tank. Do not use negative values.
AutoBlip=(0.00,0.00)