Misc Alpine EL Plan 2022 engine mod EL Plan Version 0.2

Shoya_525 · Mar 8, 2022

Shoya_525 submitted a new resource:

Alpine EL Plan 2022 engine mod Version 0.1 - 2022 Renault F1 Engine Mod

This is my version of the 2022 Alpine engine. Alpine has revised their engine for 2022 and uses the turbo design like Mercedes (split-turbo).
I only optimized the motor. The performance should be between Ferrari and Honda, much closer than the original.
I haven't been able to test the mod myself yet. If there are any problems or questions, use the "ask question" section. Before you write a bad review. I am more than happy to help and discuss with you.

The mod will not change the UI or...

Read more about this resource...

Shoya_525 · Mar 8, 2022

Alpine
original
<Engine>
<RevsPowerSpline numVertices="19">
<SplineElement x="0" y="0" op="=" />
<SplineElement x="69.9528" y="9070.3017327724356" op="=" />
<SplineElement x="121.655289" y="22966.560997596156" op="=" />
<SplineElement x="176.0811" y="43248.197516025641" op="=" />
<SplineElement x="247.059937" y="77491.822916666657" op="=" />
<SplineElement x="326.8007" y="126096.24238782052" op="=" />
<SplineElement x="413.5384" y="190500.12980769231" op="=" />
<SplineElement x="514.7543" y="278386.80649038462" op="=" />
<SplineElement x="629.6146" y="369782.87580128206" op="=" />
<SplineElement x="759.6371" y="455175.84535256407" op="=" />
<SplineElement x="902.426758" y="542833.5849358975" op="=" />
<SplineElement x="995.594" y="600394.4599358975" op="=" />
<SplineElement x="1046.77869" y="623744.1490384615" op="=" />
<SplineElement x="1099.97632" y="641302" op="=" />
<SplineElement x="1203.06" y="640235.54487179476" op="=" />
<SplineElement x="1230.45" y="634099.77564102574" op="=" />
<SplineElement x="1308.21606" y="584937.26923076925" op="=" />
<SplineElement x="1487.021" y="330769.23076923075" op="=" />
<SplineElement x="1600" y="0" op="=" />

Engine Updates
<Engine>
<RevsPowerSpline numVertices="19">
<SplineElement x="0" y="0" op="+" />
<SplineElement x="0" y="1160.154" op="+" />
<SplineElement x="0" y="2937.584" op="+" />
<SplineElement x="0" y="5531.738" op="+" />
<SplineElement x="0" y="9911.75" op="+" />
<SplineElement x="0" y="16128.57" op="+" />
<SplineElement x="0" y="24366.3" op="+" />
<SplineElement x="0" y="35607.63" op="+" />
<SplineElement x="0" y="47297.84" op="+" />
<SplineElement x="0" y="58220.13" op="+" />
<SplineElement x="0" y="69432.19" op="+" />
<SplineElement x="0" y="76794.63" op="+" />
<SplineElement x="0" y="79781.25" op="+" />
<SplineElement x="0" y="82027" op="+" />
<SplineElement x="0" y="81890.5" op="+" />
<SplineElement x="0" y="81105.69" op="+" />
<SplineElement x="0" y="74817.63" op="+" />
<SplineElement x="-0.0004882813" y="32980.78" op="+" />
<SplineElement x="0" y="0" op="+" />

Mod
<Engine>
<RevsPowerSpline numVertices="19">
<SplineElement x="0" y="0" op="=" />
<SplineElement x="69.9528" y="9192.175734375" op="=" />
<SplineElement x="121.655289" y="23034.560997596156" op="=" />
<SplineElement x="176.0811" y="43259.197516025641" op="=" />
<SplineElement x="247.059937" y="78096.820117187512" op="=" />
<SplineElement x="326.8007" y="127961.24238782052" op="=" />
<SplineElement x="413.5384" y="192360.12865" op="=" />
<SplineElement x="514.7543" y="281335.80649038462" op="=" />
<SplineElement x="629.6146" y="376982.87580128206" op="=" />
<SplineElement x="759.6371" y="463346.828125" op="=" />
<SplineElement x="902.426758" y="548081.579175" op="=" />
<SplineElement x="995.594" y="608319.42031250009" op="=" />
<SplineElement x="1046.77869" y="632755.1490384615" op="=" />
<SplineElement x="1099.97632" y="641130" op="=" />
<SplineElement x="1203.06" y="640013.4925" op="=" />
<SplineElement x="1230.45" y="633592.715" op="=" />
<SplineElement x="1308.21606" y="582143.26923076925" op="=" />
<SplineElement x="1487.021" y="330769.23076923075" op="=" />
<SplineElement x="1600" y="0" op="=" /

Engine Updates
<Engine>
<RevsPowerSpline numVertices="19">
<SplineElement x="0" y="0" op="+" />
<SplineElement x="0" y="1038.27999839744" op="+" />
<SplineElement x="0" y="2869.584" op="+" />
<SplineElement x="0" y="5520.738" op="+" />
<SplineElement x="0" y="9306.75279947915" op="+" />
<SplineElement x="0" y="14263.57" op="+" />
<SplineElement x="0" y="22506.3011576923" op="+" />
<SplineElement x="0" y="32658.63" op="+" />
<SplineElement x="0" y="40097.84" op="+" />
<SplineElement x="0" y="50049.1472275641" op="+" />
<SplineElement x="0" y="64184.195760898" op="+" />
<SplineElement x="0" y="68869.6696233974" op="+" />
<SplineElement x="0" y="70770.25" op="+" />
<SplineElement x="0" y="82199" op="+" />
<SplineElement x="0" y="82112.5523717948" op="+" />
<SplineElement x="0" y="81612.7506410257" op="+" />
<SplineElement x="0" y="77611.63" op="+" />
<SplineElement x="-0.0004882813" y="32980.78" op="+" />
<SplineElement x="0" y="0" op="+" />

Smoffinator · Mar 8, 2022

It says something about 1 byte left to read, can you fix this?

vanvegetable · Mar 8, 2022

Also getting the error message of "1 byte left to read"

Shoya_525 · Mar 8, 2022

When I tested it myself, I got the same error message. Then it's the XML file and not my EGO ERP. Thanks for letting me know. I'm trying to fix it.

Shoya_525 · Mar 8, 2022

Shoya_525 updated Alpine EL Plan 2022 engine mod Version 0.1 with a new update entry:

Alpine EL Plan 2022 engine Mod Version 0.2

I fixed the "1 byte left to read" error message.

Read the rest of this update entry...

Shoya_525 · Mar 8, 2022

I revised it and tested it myself. I no longer get the error message. Let me know if it works for you too.

Shoya_525 · Mar 8, 2022

New Version
<Engine>
<RevsPowerSpline numVertices="19">
<SplineElement x="0" y="0" op="=" />
<SplineElement x="69.9528" y="9192.175734375" op="=" />
<SplineElement x="121.655289" y="23034.560997596156" op="=" />
<SplineElement x="176.0811" y="43259.197516025641" op="=" />
<SplineElement x="247.059937" y="78096.820117187512" op="=" />
<SplineElement x="326.8007" y="127961.24238782052" op="=" />
<SplineElement x="413.5384" y="192360.12865" op="=" />
<SplineElement x="514.7543" y="281335.80649038462" op="=" />
<SplineElement x="629.6146" y="376982.87580128206" op="=" />
<SplineElement x="759.6371" y="463346.828125" op="=" />
<SplineElement x="902.426758" y="548081.579175" op="=" />
<SplineElement x="995.594" y="608319.42031250009" op="=" />
<SplineElement x="1046.77869" y="632755.1490384615" op="=" />
<SplineElement x="1099.97632" y="641130" op="=" />
<SplineElement x="1203.06" y="640013.4925" op="=" />
<SplineElement x="1230.45" y="633592.715" op="=" />
<SplineElement x="1308.21606" y="582143.26923076925" op="=" />
<SplineElement x="1487.021" y="330769.23076923075" op="=" />
<SplineElement x="1600" y="0" op="=" />

<Upgrade name="radUpgradeEngine">
<Engine>
<RevsPowerSpline numVertices="19">
<SplineElement x="0" y="0" op="+" />
<SplineElement x="0" y="1038.28" op="+" />
<SplineElement x="0" y="2869.584" op="+" />
<SplineElement x="0" y="5520.738" op="+" />
<SplineElement x="0" y="9306.76" op="+" />
<SplineElement x="0" y="14263.57" op="+" />
<SplineElement x="0" y="22506.30" op="+" />
<SplineElement x="0" y="32658.63" op="+" />
<SplineElement x="0" y="40097.84" op="+" />
<SplineElement x="0" y="50049.15" op="+" />
<SplineElement x="0" y="64184.2" op="+" />
<SplineElement x="0" y="68869.67" op="+" />
<SplineElement x="0" y="70770.25" op="+" />
<SplineElement x="0" y="82199" op="+" />
<SplineElement x="0" y="82112.55" op="+" />
<SplineElement x="0" y="81612.75" op="+" />
<SplineElement x="0" y="77611.63" op="+" />
<SplineElement x="-0.0004882813" y="32980.78" op="+" />
<SplineElement x="0" y="0" op="+" />

With upgrade name="radUpgradeEngine", there can be a maximum of three decimal places after the comma.
Example :

<SplineElement x="0" y="22506.3011576923" op="+" /> That would be wrong. Leads to error message of "1 byte left to read".

<SplineElement x="0" y="22506.30" op="+" /> That would be correct.

Shoya_525 · Mar 9, 2022

Who has already tested the mod. Is the Alpine faster with the engine? Or just as fast as the original? Thank you for the information. Helps to optimize the mod.