ALWAYS DIRT-STYLE BROWN SMOKE...also snow- and rainspray brown/dark

I get confused more and more, because of the csp-particle settings....
I'm using csp 1.79p5 and Sol2.23 and have activated the new particle effects...and i've made a quite good setting for dust, when going of track, or complete offroad-racing with only 20% extra heating, but long lasting dust-clowds...in most situations it looks very realistic on dirt/gravel/etc and it is even to few spray in rain...i wish i had more spray....BUT the spray-clowd in rain is always brownish, or very dark gray...driving behind other cars, everything gets VERY dark, almost as they have some serious engine-failure and blowing dark smoke behind them...now i was driving on a snowy road, with proper snow-effects, but the snow is also brown and i just FAIL TO GET WHITE(!) SMOKE OR SPRAY setup...and i don't know what i do wrong! In Rain, while the sun is out, its not a problem at all, as you can see on the picture, but in shadows or overcast clowds, its way to dark too...but the main issue is with the dust... Can someone help me, to get the effects more white, than brown?

EDIT: Tyre-smoke is perfect white btw....but all others are dark, or brown.
And as a second question:
The raindrops flying of from the wheels...i see in so many vids, that they come from the wheel and spread in all directions quite realistic, but for me, those water-drops always float in the air, over the tyre...they move with the car, instead coming from the wheels and fly in all directions...but you can only see that in outside-cams...onboard all is ok.
 

Attachments

  • csp.jpg
    csp.jpg
    223.4 KB · Views: 84
  • csp2.jpg
    csp2.jpg
    644.2 KB · Views: 75
  • csp3.jpg
    csp3.jpg
    448.7 KB · Views: 85
Last edited:
Back
Top