Bacfire on rpm limiter

[ZinixYT]

hi, how do i make backfire on rpm limiter on assetto corsa

Edit:

--SOLUTION--
This is a configurable backfire config to put in Car Folder > extension > ext_config.ini

[EXHAUST_FLAMES]
ANTILAG=0 ;unknown
ANTILAG_DELAY=0.05 ;unknown
ANTILAG_INTENSITY=2 ;unknown
ANTILAG_INTERVAL_MAX=1.0 ;unknown
ANTILAG_INTERVAL_MIN=0.5 ;unknown
ANTILAG_TURBO_THRESHOLD=0.9 ;unknown
DISCHARGE=1 ;off-throttle flame enabled 1=yes, 0=no
DISCHARGE_CHARGE_TIME=0.9 ;i think amount of throttle needed to fulfil criteria for flame appearing
DISCHARGE_DELAY=0.1 ;delay until flames start appearing after release of throttle
DISCHARGE_DURATION=2 ;duration of the flame
DISCHARGE_INTENSITY=0.4 ;size of the flame, higher number = bigger flames
DISCHARGE_PROBABILITY=0.6 ;probability of flames appearing per release of throttle
DISCHARGE_RPM_THRESHOLD_MAX=6000 ;unknown
DISCHARGE_RPM_THRESHOLD_MIN=500 ;unknown
DISCHARGE_WATER_TEMPERATURE_THRESHOLD=2 ;unknown
FLAT_SHIFT=1 ;flat shift flame enabled 1=yes, 0=no
FLAT_SHIFT_COOLDOWN=0.01 ;unknown
FLAT_SHIFT_DURATION=0.0005 ;duration of the flame
FLAT_SHIFT_GAS_THRESHOLD=0.5 ;unknown
FLAT_SHIFT_INTENSITY=0.01 ;size of the flame, higher number = bigger flames
FLAT_SHIFT_PROBABILITY=0.5 ;probability of flames appearing per shift
FLAT_SHIFT_RPM_THRESHOLD=6000 ;RPM of car where above this rev range the flame should appear
LIMITER=1 ;limiter flames enabled 1=yes, 0=no
LIMITER_DELAY=0.3 ;delay until flames start appearing upon hitting the threshold
LIMITER_INTENSITY=1 ;size of the flames, higher number = bigger flames
LIMITER_RPM_THRESHOLD=8500 ;set this near (below) the cars rev limiter

Credit to Ben Lee in:
https://www.racedepartment.com/threads/flames-timing-csp.206651/

 

[Michael Krone]

https://www.racedepartment.com/downloads/blowoff-valve.21345/

 

[ZinixYT]

Sorry for not adding enough info on the post but, what im after is not the backfire sound, i mean the actual flames coming out of the exhaust. But i have found a solution, i will edit the original post.

 

[putriLOL]

Hi, how do I get the extension folder? I would like to edit the flames too, but I don't have that folder and neither the "ext_config.ini" file or config.ini.
I looked in the folders of many cars: kunos, mods etc ...

 

[ZinixYT]

Hi, how do I get the extension folder? I would like to edit the flames too, but I don't have that folder and neither the "ext_config.ini" file or config.ini.
I looked in the folders of many cars: kunos, mods etc ...

In those cases you will have to create the folder and create the file.

 

[putriLOL]

In those cases you will have to create the folder and create the file.

It works perfectly.

 

[Illest__savage]

hello, i was wondering how you make the actual backfire/ crackle or pop sound. I got the flames part down, but i noticed only certain mods have a crackle/backfire after letting off the throttle. Is that all a apart of sound modding or could you modify the "sound.ini" file and have it work that way?