Cars Brake Feels Underpowered

Hello, last week i test my mod of Corvette Z06 C7, there is little issue, when i brake, the car not want to turn, even the steer is not locked, and even with abs on.

The worst part is when AI steer the cars, ai can't turn, AI just brake and turn a little bit, then AI still braking and crashing to the wall.

What part of car's data are involved in this?
in the data.ini not seen any issues, in this ai.ini not too

ai.ini

[HEADER]
VERSION=3

[GEARS]
UP=6500
DOWN=4200
SLIP_THRESHOLD=1.05
GAS_CUTOFF_TIME=0.270

[PEDALS]
GASGAIN=4.0
BRAKE_HINT=1
TRAIL_HINT=1

[STEER]
STEER_GAIN=1.58

[LOOKAHEAD]
BASE=21
SPEED_GAIN=0.16
GAS_BRAKE_LOOKAHEAD=0

[ULTRA_GRIP]
VALUE=1.5

[PHYSICS_HINTS]
AERO_HINT=1

brakes.ini

[HEADER]

VERSION=1



[DATA]

MAX_TORQUE=3900 ; Maximum Brake torque in Nm

FRONT_SHARE=0.64 ; Percentance of brake torque at front axis

HANDBRAKE_TORQUE=1500

COCKPIT_ADJUSTABLE=0 ; 0: no bias control from cockpit, 1: bias control from cockpit

ADJUST_STEP=0.5 ; step for bias cockpit adjustment.



[DISCS_GRAPHICS]

DISC_LF=GEO_DiskFL

DISC_RF=GEO_DiskFR

DISC_LR=GEO_DiskRL

DISC_RR=GEO_DiskRR

FRONT_MAX_GLOW=0.0

REAR_MAX_GLOW=0.0

LAG_HOT=0.995

LAG_COOL=0.98
 
Hello, last week i test my mod of Corvette Z06 C7, there is little issue, when i brake, the car not want to turn, even the steer is not locked, and even with abs on.

The worst part is when AI steer the cars, ai can't turn, AI just brake and turn a little bit, then AI still braking and crashing to the wall.

What part of car's data are involved in this?
in the data.ini not seen any issues, in this ai.ini not too

ai.ini

[HEADER]
VERSION=3

[GEARS]
UP=6500
DOWN=4200
SLIP_THRESHOLD=1.05
GAS_CUTOFF_TIME=0.270

[PEDALS]
GASGAIN=4.0
BRAKE_HINT=1
TRAIL_HINT=1

[STEER]
STEER_GAIN=1.58

[LOOKAHEAD]
BASE=21
SPEED_GAIN=0.16
GAS_BRAKE_LOOKAHEAD=0

[ULTRA_GRIP]
VALUE=1.5

[PHYSICS_HINTS]
AERO_HINT=1

brakes.ini

[HEADER]

VERSION=1



[DATA]

MAX_TORQUE=3900 ; Maximum Brake torque in Nm

FRONT_SHARE=0.64 ; Percentance of brake torque at front axis

HANDBRAKE_TORQUE=1500

COCKPIT_ADJUSTABLE=0 ; 0: no bias control from cockpit, 1: bias control from cockpit

ADJUST_STEP=0.5 ; step for bias cockpit adjustment.



[DISCS_GRAPHICS]

DISC_LF=GEO_DiskFL

DISC_RF=GEO_DiskFR

DISC_LR=GEO_DiskRL

DISC_RR=GEO_DiskRR

FRONT_MAX_GLOW=0.0

REAR_MAX_GLOW=0.0

LAG_HOT=0.995

LAG_COOL=0.98
Open the car in Hotlap mode, press Ctrl+C and then open the ai app
 
Back
Top