Brake lights not visible with latest CSP+SOL

[AlBundy33]

Hi,

I'm currently running AC with content manager custom shaders patch 1.6.0 (latests recommened) and SOL 1.5.5

Today I've tried latest CSP (0.1.75) with latest SOL (2.1.3) - as far as I could see all was working good except of the brake lights - they are barley visible at daytime.
They change the light a little bit but not as clear as with CSP 1.6.0 / SOL 1.5.5

Does anybody know how to fix this?

 

[Peter Boese]

Hello,

You could activate "controlled_by_sol" in Sol_config app page 5. Then you can control CSP lights, with the multi below. Or even better, you go to page 20 and there you can control emissives just for the daytime, maybe set it back to 100 or higher...

 

[AlBundy33]

I don't know if controlled_by_sol is on or off - but I can not toggle the switch.

attached you'll find some screenshots with csp 1.6.0 and sol 1.5.5 (_old*.png) and with the latest versions (_new*.png)

 

[AlBundy33]

does the red-switch mean on or off?
and why is the switch locked?

 

[AlBundy33]

@Peter Boese do you have an idea?

 

[Peter Boese]

Maybe try to set this to a higher level...

 

[AlBundy33]

Hi Peter,

emissive_day was also locked - according to manual that can be done by pp filter.
So I've changed from _Sol_Extra to _Sol - with _Sol the lights are better visible.
My own brake lights are much more visible if I set emissive_day to a higher value.
Unfortunatly it seems that this settings doesn't affect opponents in distance.
e.g. nürburgring turn 1 - most times I see to late that the oponents are already braking. :-/

I'll see if I get used to _Sol pp-filter - if not I'll have to play with the values.

Thanks for you help