hey AC fans...can anyone tell me which value changes the camera angle so you can get a lower or higher view on replays?
changing camera angles
- Thread starter ozsprinter
- Start date
ok, this is a camera section of a cameras.ini file
you should check these lines:
MIN_FOV=30
MAX_FOV=30
and at the bottom:
FOV_GAMMA=1
if it's the same number, it has no zoom, if you change Min_fov=15 then you add a zoom effect and changin the FOV_gamma=0.5 it slows a bit the zoom effect.
you can play with those values
to change the angle you'd have to edit the camera within kseditor but with these tips you just open on any text editor, change some values, save and load a replay and check.
Code:
[CAMERA_0]
NAME=CAM0
POSITION=535.427 ,73.6184 ,-2855.22
FORWARD=0.211105 ,-0.0374921 ,0.976746
UP=0.00792004 ,0.999297 ,0.0366463
MIN_FOV=30
MAX_FOV=30
IN_POINT=0
OUT_POINT=0.0198684
SHADOW_SPLIT0=180
SHADOW_SPLIT1=420
SHADOW_SPLIT2=780
NEAR_PLANE=1
FAR_PLANE=5000
MIN_EXPOSURE=0.35
MAX_EXPOSURE=0.55
DOF_FACTOR=10
DOF_RANGE=10000
DOF_FOCUS=0
DOF_MANUAL=0
SPLINE=
SPLINE_ROTATION=0
FOV_GAMMA=1
SPLINE_ANIMATION_LENGTH=15
IS_FIXED=0you should check these lines:
MIN_FOV=30
MAX_FOV=30
and at the bottom:
FOV_GAMMA=1
if it's the same number, it has no zoom, if you change Min_fov=15 then you add a zoom effect and changin the FOV_gamma=0.5 it slows a bit the zoom effect.
you can play with those values
to change the angle you'd have to edit the camera within kseditor but with these tips you just open on any text editor, change some values, save and load a replay and check.
