Content Manager steer lock option...

[racinjoe013]

Do most people enable the 'auto adjust scale to match car's steer lock option' in CM?

 

[Henyo256]

Yes. But it can glitch and give you all 900 when you need 360. So i adjust angle of rotation in profile for my wheel.

 

[Richard Dastardly]

No, just use soft lock ( don't use both! ).

 

[marcocale]

Yes and working perfectly with an OSW Simucube 1
Set SImucube to the max degree allowed by AC (sorry, I don't remember, 1140?) and then let CM do the rest.
In AC soft lock disabled, lock are directly managed from Simucube. Soft lock of my wheel (and generally of all OSW) are working a lot better than the one in AC.

Together with car specific controls settings a great addition, mainly when you use different steering wheels on your device.
I simply don't have to care anymore of anything, just to be sure to mount the correct wheel for the car I want to use.
Till now never a fault with a lot of cars, kunos and modded content indifferently

 

[Elaphe]

Yes and working perfectly with an OSW Simucube 1
Set SImucube to the max degree allowed by AC (sorry, I don't remember, 1140?) and then let CM do the rest.
In AC soft lock disabled, lock are directly managed from Simucube. Soft lock of my wheel (and generally of all OSW) are working a lot better than the one in AC.

Together with car specific controls settings a great addition, mainly when you use different steering wheels on your device.
I simply don't have to care anymore of anything, just to be sure to mount the correct wheel for the car I want to use.
Till now never a fault with a lot of cars, kunos and modded content indifferently

How do you enable soft lock from the Simcube 1 software? I also own a Simucube 1 and my steering wheel rotates freely thousands of degrees in the game.

 

[marcocale]

I'm not on my game PC, but if I remember correctly check in the Hardware Setup tab of Simucube software that bumpstops effects is enabled. But I think it should be enabled by default.

 

[Elaphe]

I have tried enabling bumstop in my Simucube software but then, as soon as my steering wheel reaches the maximum number of degrees, the force feedback goes off.

 

[marcocale]

Sorry can't help you. My wheel had always perfect bumpstops from the beginnig, nothing compared to the soft lock simulated via software inside simuators.
I have a Simucube 1, small mige, upgraded with Biss-C encoder bought from SImracingbay and with last Granite firmware.
I never cared about bumpstop, enabled by default, just set the wheel angle and bumpstops were working perfectly.