I have been driving Assetto Corsa for about a month. Now, I get all the way to the drivers seat on my selected road, and none of the controls work. I hear the audio just fine. My hands don't leave the wheel to change gears and the throttle does not work. Everything else seems fine. Any thoughts?
Controls Stopped Working
- Thread starter Dragonsushi2022!!
- Start date
Johnny Speed
Premium
First thing I would do it reboot the computer, and wheel (if you are using a wheel). That usually fixes it for me.
Yes, the settings indicate "Wheel".
Rebooted several times. I still can only get to the drivers seat, and sit there with no controls. A race will start, and the other cars take off, while my controls do not work. Everything else is normal.
Maybe it would be helpful to tell us what hardware you are using. 
If its a Logitech-Wheel, from what I've read in the last couple of weeks, newest version of GHub causes a lot of problems with both AC and ACC.
If its a Logitech-Wheel, from what I've read in the last couple of weeks, newest version of GHub causes a lot of problems with both AC and ACC.
Last edited:
Maybe it would be helpful to tell us what hardware you are using.
If its a Logitech-Wheel, from what I've read in the last couple of weeks, newest version of GHub causes a lot of problems with both AC and ACC.
Oh Yes. Logitech G923 Racing Wheel and Pedals for Xbox X|S, Xbox One and PC featuring TRUEFORCE up to 1000 Hz Force Feedback, Responsive Pedal, Dual Clutch Launch Control, and Genuine Leather Wheel Cover I am using a Vive Pro headset and a VR ready hp PC.
Oh Yes. Logitech G923 Racing Wheel and Pedals for Xbox X|S, Xbox One and PC featuring TRUEFORCE up to 1000 Hz Force Feedback, Responsive Pedal, Dual Clutch Launch Control, and Genuine Leather Wheel Cover I am using a Vive Pro headset and a VR ready hp PC.Maybe it would be helpful to tell us what hardware you are using.
If its a Logitech-Wheel, from what I've read in the last couple of weeks, newest version of GHub causes a lot of problems with both AC and ACC.
OK, so uninstall the newest version of GHub and use an older version.
I have no idea what GHub is. I just spent $1300 at Geek Squad. They cannot fix the controls or the game crashing when you click "Go!"
GHub is the Logitech Gaming Software, which is for sure installed at your system.
Then that software is flawed and is crashing my PC at the same spot every time. Geek Squad, RaceDepartment and Steam Forums have no idea why
Johnny Speed
Premium
Nobody from Geek Squad knows what Assetto Corsa is.
Last edited:
Should I uninstall Assetto Corsa and maybe try a different driving game that is more compatable with the G923? Can you suggest a better suited game?
Are you using content manager? If so, try to simply reload your wheel config.
It happened more than once to me: starting a session, controls not working, exit, reloading wheel config, restarting the session and everything is ok
It happened more than once to me: starting a session, controls not working, exit, reloading wheel config, restarting the session and everything is ok
You mean deleting the wheel settings in content manager? Just delete and re-enter each pedal and gear setting for each button?
Nope, I guess you saved a configuration, if I remember well everybody did, at first use.
In CM you go to Settings -> Assetto Corsa -> Controls and you get the assignment page. On the lower right part of the screen you see 4 buttons, the one on the left is a list of your pre-saved wheel configs. You just have to re-load your config by clicking the left button and choosing your fav wheel config. I am not saying this is what solves the problem but everytime I faced unworking controls it was the solution.
Last edited:
This happens to me all the time, and I use VR so I am not that happy to find my mouse and keyboard to end up the race and see whats going on, loading screen just you watching in the VR, your neck doesnt last forever so you wanna be using the vr just when you playing, not troubleshooting.
But yeah I kind of realized that I always keep CM in the background, but when I finish a session I unplug the wheel usb and power, then plug it back the next day or so, CM wont kick in for some reason the buttons, both on the gearbox and the wheel, however the wheel, pedals and gears work, I guess is CM that doesnt detect the hardware was unplugged and re plugged back.
So either rescan controllers or close and open CM. it usually makes it work (plug all the wheel and stuff before opening CM)
