CSL Elite Wheel Base wobbles back and forth when oversteering

[Mr.Turtle]

So i just got this wheel and i love it. except that the wheel has the issue stated above. I have a very decent rig and am not new to sim racing I just dont know whats causing this Issue.
Here is a video i made of it:

 

[super_gt]

Is this the new V1.1 version and which game is this?
Edit:
What is the DRI setting value which you use?
If you use positive DRI value, try with DRI set to OFF or negative value.

 

[Mr.Turtle]

It is the newest version availableon the fanatec site and the game is Assetto Corsa. drI is on off and i cant set it to negative

 

[super_gt]

It is the newest version availableon the fanatec site and the game is Assetto Corsa. drI is on off and i cant set it to negative

This is odd, your wheel base must have negative values.
Have you update the wheel base to the latest drivers?
You can download the latest driver for CSL Elite V1.1(if this is your wheel base) from here.

 

[Mr.Turtle]

This is odd, your wheel base must have negative values.
Have you update the wheel base to the latest drivers?
You can download the latest driver for CSL Elite V1.1(if this is your wheel base) from here.

Ok i will try but im on vacation starting tomorrow so I can only tell you if it worked in a week and a half.

 

[Mr.Turtle]

This is odd, your wheel base must have negative values.
Have you update the wheel base to the latest drivers?
You can download the latest driver for CSL Elite V1.1(if this is your wheel base) from here.

so i updated my drivers now and i can set negative values now BUT itstill does the same thing. i guess you have a fanatec wheel to and maybe you could sen dme your ingame settings as well

 

[super_gt]

so i updated my drivers now and i can set negative values now BUT itstill does the same thing. i guess you have a fanatec wheel to and maybe you could sen dme your ingame settings as well

These are recommended settings from Fanatec:
(PC version)
CSL Elite Wheel Base V1.1 / CSL Elite Wheel Base + / CSL Elite Racing Wheel PS4

SEN 1080 (shown as 108 on some displays)
FF 100
SHO 100
ABS User Preference
DRI -02
FOR 100
SPR 100*
DPR 100
BRF User Preference
FEI 070

*SPR value has no effect.

In-Game Settings:
Invert: Unchecked
Gain: 75%
Filter: 0%
Min Force: 0%
Kerb Effects: 0%
Road Effects: 0%
Slip Effects: 0%
ABS Effects: 0%
Enhanced Understeer Effect: Unchecked
Half FFB Update Rate: Unchecked
Gamma: 1.00
Filter: 0.00
Speed Sensitivity: 0.00

You may also contact Fanatec support and ask if this is normal, or write in their forum.
I have the CSL Elite( the old version that is different from yours) and the Assetto Corsa but I do not have much experience with it because I do not like it.

 

[Mr.Turtle]

These are recommended settings from Fanatec:
(PC version)
CSL Elite Wheel Base V1.1 / CSL Elite Wheel Base + / CSL Elite Racing Wheel PS4

SEN 1080 (shown as 108 on some displays)
FF 100
SHO 100
ABS User Preference
DRI -02
FOR 100
SPR 100*
DPR 100
BRF User Preference
FEI 070

*SPR value has no effect.

In-Game Settings:
Invert: Unchecked
Gain: 75%
Filter: 0%
Min Force: 0%
Kerb Effects: 0%
Road Effects: 0%
Slip Effects: 0%
ABS Effects: 0%
Enhanced Understeer Effect: Unchecked
Half FFB Update Rate: Unchecked
Gamma: 1.00
Filter: 0.00
Speed Sensitivity: 0.00

You may also contact Fanatec support and ask if this is normal, or write in their forum.
I have the CSL Elite( the old version that is different from yours) and the Assetto Corsa but I do not have much experience with it because I do not like it.

ok so i tryed the settings and the wobble is still there. I also found out that if i drive in a straight line and i steer a bit to the right or left and let go it goes over the center of the wheel and kinda has a pendulum effect but im not sure if that is the case irl as well (not of driving age). I will try and contact the fanatec support now but if you have any other ideas ill be very gratefull to hear them

 

[Mr.Turtle]

I have contacted the support and they said if my DRI is on -2 and the SPR is on 100 it shouldnt matter so it will most likely be the ff output from the game