DD1 wheel not working in ACC

[RoryBreaker]

When i load into a track the car options menu on the left comes up and it just auto scrolls through the options. When i press any inputs they aren't recognised.

Anyone know how to fix this please?

 

[pgreenwo]

Are you using left and right on your funky switch to change the options?

 

[RoryBreaker]

Are you using left and right on your funky switch to change the options?

No Im not pressing anything at all but its acting as though i am by auto scrolling the options.

Im using the F1 wheel that came with it and had a thought earlier that it maybe the position or setting of 1 of the switches causing it. Haven't been able to try that yet though

 

[Lezzam]

Maybe one of the (rotary) switches are bound to the options. You can try to go to the key bindings menu and push all your buttons, in the right corner below you can see what option is set to the pressed button. Maybe you’ll find the button who is causing the problem. Another thing you can try to reset all the key bindings.
I hope this helps.

 

[RoryBreaker]

Maybe one of the (rotary) switches are bound to the options. You can try to go to the key bindings menu and push all your buttons, in the right corner below you can see what option is set to the pressed button. Maybe you’ll find the button who is causing the problem. Another thing you can try to reset all the key bindings.
I hope this helps.

Appreciate the help, i finish work shortly so that will be something il check. Im new to ACC so didn't know you could do a check like that, nice 1

 

[pgreenwo]

Any joy?

 

[RoryBreaker]

Any joy?

Unfortunately not its still doing the same thing, brings up the car electronics menu and automatically scrolls through the options.

When i press the pedals nothing registers

 

[RoryBreaker]

Any joy?

Managed to stop the auto scrolling issue, and get the pedals to work. But its now not picking up when i turn the steering wheel.

When i change the mode to CSW 2.5 it all works but the wheel feels 'dead' and really light. Not sure if its the drivers or what

 

[RoryBreaker]

Just had a run on AC and everything works fine on there after going through the set up wizard. Out of ideas for now for getting the wheel detected on ACC