A small review after buying the 3DOF seat mover from dynkit:
I have been interested for a long time in such a system, but
a DIY build was due to lack of time, tools and knowledge not an option for me.
After some days of intensive researches, I came across this thread and got interested.
It is affordable and after reading further, it sounded good to me and I contacted Igor.
The whole process took only four weeks from building to the delivery to me in Germany.
One week for the delivery itself, pretty fast.
## building process
Putting the steel frame together took only two hours and is very solid.
I have it attached with HE SimPedals.
The wheel is an OSW with small Mige, which is installed on a seperate frame.
I think, it is more like in real car, where you are forced to/from the wheel, too.
The gears of the motors have some slack, of course. This can be felt on the traction loss axis,
when it does not return to center completely. I will try springs, in order to have it return to center.
For roll/pitch axis, I do not recognize this while driving.
The software setup with the provided presets is just easy.
The fine tuning with the provided SimTools is the most time consuming process, I would say ;
Most interesting thing after all, when I have DOF turned off,
even with the FFB wheel, it feels like dead -)
With the great support (Igor to name him),
I would buy it again, no doubt.
