DIY OSW

[Desmo_52]

Hello Everyone,
I'm new to this forum and I'm looking for a modest opinion which helps me finding a solution for a problem that may already have been discussed so please, be kind...
Everyone here has already heard about OSW and home made steering wheel base projects thus I hope you can help me trying not to waste money:
I recently purchased the well known "Mige ST130-M10010" Servo motor with a BISS-C Encoder. A short time ago I was planning to build a simplified base using the common AASD 30A Driver that Mige accompanies to this servo motor + STM32 Discovery card but I noticed that the driver only supports the 2500PPR encoder.
I decided to go for an higher encoding resolution so i chose the BISS-C version thinking that I would have bought all the "Ioni" electronics little by little. I was considering the "IoniCube 1x" motherboard combined with "IoniPro" driver but I took a pause trying to figure out if there is any equal but cheaper solution.
I'll maintain every Power supply standard Using a 48V, 600W, 12.5A PSU so what other electronics can I pick to make things work correctly?

 

[bberger]

There is an alternative viatnamese firmware for the STM out afaik that may support the Biss-C encoder.

//Edit: found it

GitHub - hoantv/CarSimulatorFirmware: This is openfirmware ffb for stm32 that supports all effets

This is openfirmware ffb for stm32 that supports all effets - hoantv/CarSimulatorFirmware

github.com

They've got a discord. Maybe they can give you more insight there.

 

[bberger]

Not what I was referring to, but @thanos006gr also seems to have a solution. Maybe he's got some stock left:

Thanos TDD controller - Thanos Motion Electronics LLC

Get your latest version of Thanos TDD controler now ! Offical Thanos Motion Electronic web store. Local stocks and fast deliveries.

www.thanos-motion.com

 

[Desmo_52]

It seems that this Thanos TDD controller is already out of stock, however, it is compatible with AASD-30A Drivers. These drivers only supports PPR resolution encoders.