Misc F1-2018 SimHub Beta 01 0.2

[Ensi Ferrum]

Ensi Ferrum submitted a new resource:

F1-2018 SimHub Beta 01 - Nextion Dash + LEDs Mapping Beta 01

First iteration of the F1-2018 Dash.
It is made for the Nextion 3.4" and currently in Beta state.
You need the at least SimHub 6.0.5.Beta1 Wotever released 23.08.2018!
Currently it only works in the "Legacy" UDP mode.
You can see a very special feature here:

The "Launch Mode"!
I also included some LEDs mappings.
It is made for 8 - 16 - 8 Layout of LEDs. 8 vertical left, 16 horizontal, 8 vertical right.
No matter which modern F1-2018 car you're in,...

Read more about this resource...

 

[sts.sam.sts]

hi !
very nice work ! How I can use it with simhub for a regular dashboard ?
I don't have nextion

THANKS!

 

[Ensi Ferrum]

It is Nextion only.
Maybe I'll do a DashStudio version anytime later this year.
If you wanna do a DashStudio version on your own, you can use my formulas and I can send you the background graphic.

 

[Ensi Ferrum]

Something …..

 

[Ensi Ferrum]

… went ...

 

[Ensi Ferrum]

… wrong.

I was just to dumb to enter the version number, and then forgot the new archive

 

[Ensi Ferrum]

Ensi Ferrum updated F1-2018 SimHub Beta 01 with a new update entry:

SimHub Nextion Dash and LEDs mapping F1-2018 - Next Beta

The SimHub Nextion Dash for F1-2018 is nearly complete.
Features:
- Launchmode
- B-Bal, Diff, ERS, Fuel-Mix is shown in big on Change
- (V)SC Delta bar

LEDs mapping
Features:
- Launchmode
- Automatic Change of LEDs layout, depending on car*

* Doesn't work in Time-Trial, big THX to CM! This "feature" was already in F1-2017.

Preview:

Read the rest of this update entry...

 

[siffonen]

Could you make this also for 3.2" nextion display?

 

[Ensi Ferrum]

3.2" is a bit small for all the Information.
So, no conversion to 3.2" in the Pipeline.
3.5" might be possible

 

[anthonyl59]

see next post

 

[anthonyl59]

OK so i got some of the dash to work but the temps are not showing..only speed / laps /.led's / gear but no temperatures.

 

[Ensi Ferrum]

Please make sure you have set the Right telemtry Settings ingame:

 

[unsal]

please make it for 3.5" its a great work ..but icant start the led.. and can you add tyrewear percent.?.

 

[unsal]

can you add a led rpm bar

 

[Ensi Ferrum]

Sorry for letting you wait, @unsal , was a bit busy this evening.
3.5" might come, some other guy is going to do the conversion.
Tyrewear indicator might be possible on a third page with some other usefull date, maybe.
LED-bar wont be done by me. I have HW LEDs and the logic behind the HW-LEDs is as complex as the Nextion dash itself. For every car in F1-2018 I have unique LEDs mapping.
But maybe I can ask the conversion guy to add a simple LEDs bar as there is some space on the screen with the 3.5" Nextion.
You might also have a look at this genuine guy's video how to build a cheap and simple Hardware LED stripe:

 

[Ensi Ferrum]

hi !
very nice work ! How I can use it with simhub for a regular dashboard ?
I don't have nextion

THANKS!

Dash Studio version is in the first Beta stage right now :-D

 

[unsal]

Sorry for letting you wait, @unsal , was a bit busy this evening.
3.5" might come, some other guy is going to do the conversion.
Tyrewear indicator might be possible on a third page with some other usefull date, maybe.
LED-bar wont be done by me. I have HW LEDs and the logic behind the HW-LEDs is as complex as the Nextion dash itself. For every car in F1-2018 I have unique LEDs mapping.
But maybe I can ask the conversion guy to add a simple LEDs bar as there is some space on the screen with the 3.5" Nextion.
You might also have a look at this genuine guy's video how to build a cheap and simple Hardware LED stripe:

thanks for your reply .. iknow this led type and i have got it but i want to on the screen because i dont want to use many usb cable.. also about tyrewear please add it for next update

 

[D.Vermeer]

Hi, I have everything installed and the settings in f1 2018 are exactly like on the picture you posted but not everything works. The temperature, brake balance, engine mode and ers don't work. The settings are the same as on the picture you posted. Does anyone know how to fix this?

thanx

 

[Marino Sandiford]

Ensi Ferrum submitted a new resource:

F1-2018 SimHub Beta 01 - Nextion Dash + LEDs Mapping Beta 01



Read more about this resource...

Hello,
In the F1 2017 version there are many elements that are not in function, can you tell me how to activate them.

 

[Ensi Ferrum]

U mean using this dash with F1-2017?
As the API has changed this dash is only for F1-2018.