Fanatec Clubsport pedals PU foam question
- Thread starter dave kirk
- Start date
Yes I did that, twice to be precise. It still sucked after a couple of months sadly (mushy, walk on snow feel if you lubed it a little bit less, sticky if more), and after the inevitable mushroom effect on the foam.
A shameless plug, I'm selling a replacement kit (not a foam, but PU rods), to upgrade the feel of the V1,V2, CSR Elite brake pedal.
Fanatec Clubsport Pedal V1 V2 CSR Elite PU Foam Replacement Kit (6 PU rods)
I'm leaving open the Make Offer for the first 20 purchase, offer 19.99 USD (
or more), and I'll accept it. Message me if you got any questions!
A shameless plug, I'm selling a replacement kit (not a foam, but PU rods), to upgrade the feel of the V1,V2, CSR Elite brake pedal.
Fanatec Clubsport Pedal V1 V2 CSR Elite PU Foam Replacement Kit (6 PU rods)
I'm leaving open the Make Offer for the first 20 purchase, offer 19.99 USD (
Upvote
0
I think I saw this on Ebay earlierYes I did that, twice to be precise. It still sucked after a couple of months sadly (mushy, walk on snow feel if you lubed it a little bit less, sticky if more), and after the inevitable mushroom effect on the foam.
A shameless plug, I'm selling a replacement kit (not a foam, but PU rods), to upgrade the feel of the V1,V2, CSR Elite brake pedal.
Fanatec Clubsport Pedal V1 V2 CSR Elite PU Foam Replacement Kit (6 PU rods)
I'm leaving open the Make Offer for the first 20 purchase, offer 19.99 USD (or more), and I'll accept it. Message me if you got any questions!
Upvote
0
How about the hall sensors? .. they are not listed in europe's site
Upvote
0
BTW, does anyone bought the loadcell unbranded from ebay? is it any good?
Upvote
0
Hi, I bought 4 from ebay china.
So far, they work flawless. and you get 3 to replace when something go wrong for 4€ (how much i payed till Germany), My advise, buy it NOW!!!
Note: The electric cables from the load cell are too thin, and difficult to work with.
And, it looks like the Fanatec Load Cell have the +/- inverted (color wise).
I used a broken LC from Fanatec, and cut the electric connector. Then i used some Dupond Connectors. The old LC connector cable have a 3 cable male dupont connector,and on the new LC, 3 cable female dupont connector.
When, next time, a LC is broken, i can easily replace them.
With my solution, i can easily go back and reorder the cable connection (the +/- problem i talked before).
Tiago Viana
So far, they work flawless. and you get 3 to replace when something go wrong for 4€ (how much i payed till Germany), My advise, buy it NOW!!!
Note: The electric cables from the load cell are too thin, and difficult to work with.
And, it looks like the Fanatec Load Cell have the +/- inverted (color wise).
I used a broken LC from Fanatec, and cut the electric connector. Then i used some Dupond Connectors. The old LC connector cable have a 3 cable male dupont connector,and on the new LC, 3 cable female dupont connector.
When, next time, a LC is broken, i can easily replace them.
With my solution, i can easily go back and reorder the cable connection (the +/- problem i talked before).
Tiago Viana
Upvote
0
Hi, I bought 4 from ebay china.
So far, they work flawless. and you get 3 to replace when something go wrong for 4€ (how much i payed till Germany), My advise, buy it NOW!!!
Note: The electric cables from the load cell are too thin, and difficult to work with.
And, it looks like the Fanatec Load Cell have the +/- inverted (color wise).
I used a broken LC from Fanatec, and cut the electric connector. Then i used some Dupond Connectors. The old LC connector cable have a 3 cable male dupont connector,and on the new LC, 3 cable female dupont connector.
When, next time, a LC is broken, i can easily replace them.
With my solution, i can easily go back and reorder the cable connection (the +/- problem i talked before).
Tiago Viana
hi,.. i saw them on ebay?
that metal thing... the size is standard?
Upvote
0
If it have the same shape of Fanatec, is the same dimension. I choose from ebay the cheaper solution, and it fitted perfectly. And for the final price, i think is worth the risk.
Just an exemple (Probably not the most expensive...)
http://www.ebay.com/itm/4-pcs-50Kg-...466384&hash=item3ad47c08c5:g:LowAAOSwImRYSQV3
One more note that i think is important.
The cable color schematic is:
White - Positive
Black - Negative
Red - Signal
Tiago Viana
Just an exemple (Probably not the most expensive...)
http://www.ebay.com/itm/4-pcs-50Kg-...466384&hash=item3ad47c08c5:g:LowAAOSwImRYSQV3
One more note that i think is important.
The cable color schematic is:
White - Positive
Black - Negative
Red - Signal
Tiago Viana
Upvote
0
Obrigado Tiago!!!
One more question:
That's the color schematic of the fanatec one?
One more question:
That's the color schematic of the fanatec one?
Upvote
0
It looks the cable color is inverted on Fanatec. The ones from china, they come with that color schematic.
Connect white with black, and black with white. (in my setup)
I advise to test it before soldering in final form.
Sem problemas
Upvote
0
Yes I did that, twice to be precise. It still sucked after a couple of months sadly (mushy, walk on snow feel if you lubed it a little bit less, sticky if more), and after the inevitable mushroom effect on the foam.
A shameless plug, I'm selling a replacement kit (not a foam, but PU rods), to upgrade the feel of the V1,V2, CSR Elite brake pedal.
Fanatec Clubsport Pedal V1 V2 CSR Elite PU Foam Replacement Kit (6 PU rods)
I'm leaving open the Make Offer for the first 20 purchase, offer 19.99 USD (or more), and I'll accept it. Message me if you got any questions!
If they are anything like the bpk they completely change the feel of the pedal. Much better.
Upvote
0
Btw, does anyone know where can one get the hall sensors for the v1 or v2?~
Thank you!
Thank you!
Upvote
0
Yes they are. Sold 100+ of them.
New listing here: http://www.ebay.com/itm/122661145539
Previous with reviews here: http://www.ebay.com/itm/122316912127
(ebay noob got his listing ended...)
Upvote
0
Is it possible to just get a pair of the lightest? If so, how much would that be? Or just get a set with only a single weight? With a spare, I surmise the other 4 would be a waste once I use the preferred weight. I already find the Elite's stock pedals quite short and tough.
Upvote
0
Hey DutyFree ! Are you going to restock the PU rods ? It s sold out ..-[
Upvote
0
