With no email or notification my new wheel and pedals kit arrived today causing me much surprise and joy, which was only increased when I connected everything, updated the firmware, calibrated it all and went for a drive in AC. Wow, what an improvement on my old G920, along with a proper LUT for it I‘ve been so impressed.
However, when I tried to give Automobilista 2 and Project Cars 2 a try it would only recognise the wheel but not the pedals. I simply couldn’t calibrate them within the two games even though they were fully calibrated within the external software and worked perfectly in AC.
Is there anything obvious I may have missed? I selected ‘separate’ in the menu for the pedals if that makes a difference.
Thanks
However, when I tried to give Automobilista 2 and Project Cars 2 a try it would only recognise the wheel but not the pedals. I simply couldn’t calibrate them within the two games even though they were fully calibrated within the external software and worked perfectly in AC.
Is there anything obvious I may have missed? I selected ‘separate’ in the menu for the pedals if that makes a difference.
Thanks
![Luca [OT]](/data/avatars/s/3235/3235113.jpg?1697196734){kind=avatar}
