PC1 Fanatec Csr Settings.

[EazyEllis]

Hello there I just wanted to pass out some settings I'm using with my fanatec CSR. For me they have been a game changer.

I use Fanleds found here http://www.fanaleds.com/ and have plugged my Fanatec CSR Elite pedals in a separate usb, And I drive in game with no assists.

My wheel settings are
Firmware 756
Driver Version 219 (Beta)

Sen OFF
FF 100
Sho 100
Dri OFF
ABS OFF, Use Fanaleds
ACL OFF

Under Calibrate Force Feed Back.

Change these 3 settings to

Steering Gain to 1.00
Deadzone Removal Range 0.00
Deadzone Removal Falloff 0.10

I have finally found some settings I enjoy through changing a couple settings since the new FFB update, After messing about a lot after I figure out I really did not need to.

And Thanks to martinsalat, For recommending the steering gain setting that and the dead zone removal falloff was honestly the only thing killing my enjoyment out of the game.

 

[martinsalat]

what's your steering gain settings?

 

[EazyEllis]

Steering Gain is on 500. Its a new setting to me so I haven't touched it.

 

[martinsalat]

that's much to high i have tire force 100 and gain 100 on my csr-e. try it

 

[EazyEllis]

that's much to high i have tire force 100 and gain 100 on my csr-e. try it

Ahh Nice one man, that has helped so much!

 

[martinsalat]

you also can try it without jacks files. just for compare .so you can change setting per car in the pit.

 

[EazyEllis]

you also can try it without jacks files. just for compare

Yeah I will do now, Man no more damn clipping, I wish I knew about that steering gain setting.

 

[EazyEllis]

you also can try it without jacks files. just for compare .so you can change setting per car in the pit.

I removed them and now and I can feel what the car is upto alot better, Even feel the wheels locking up.

 

[martinsalat]

do you have installed the new 219 fanatec driver https://www.google.at/url?sa=t&rct=...=5HWDcc1xrzPcaMUPiQh5pg&bvm=bv.98197061,d.Y2I there are improvements especially to the pedals.

 

[EazyEllis]

do you have installed the new 219 fanatec driver https://www.google.at/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CCMQFjAAahUKEwi2qKTszurGAhXIFJAKHRTeAKI&url=https://www.fanatec.com/forum/discussion/161/new-driver-219-and-firmware-released&ei=G2OtVfauOcipwASUvIOQCg&usg=AFQjCNEYi4e1NE86Cv4KXfwDyr13Dk-H-A&sig2=5HWDcc1xrzPcaMUPiQh5pg&bvm=bv.98197061,d.Y2I there are improvements especially to the pedals.

Oh no I havent will give them a try now, Thanks again Martin.

 

[EazyEllis]

do you have installed the new 219 fanatec driver https://www.google.at/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CCMQFjAAahUKEwi2qKTszurGAhXIFJAKHRTeAKI&url=https://www.fanatec.com/forum/discussion/161/new-driver-219-and-firmware-released&ei=G2OtVfauOcipwASUvIOQCg&usg=AFQjCNEYi4e1NE86Cv4KXfwDyr13Dk-H-A&sig2=5HWDcc1xrzPcaMUPiQh5pg&bvm=bv.98197061,d.Y2I there are improvements especially to the pedals.

Well Martin, Thank you so much for the tips. These Settings make me feel like I'm playing a whole new game. So much more alive through the wheel.

 

[EazyEllis]

I'm sorry about editing my main post so much peeps, After messing around for a few days I realise Default with a few minor changes actually made the game so much better For my Fanatec CSR.

 

[Andrew Pienaar]

so the first post is your settings

 

[EazyEllis]

so the first post is your settings

Yes they are, I had different settings up there at first. Just did not realize that Project cars had a FFB update.