Fanatec Porsche GT2 Wheel

[WhytedXL]

I'm having issues with RF2 not recognising any steering input from my wheel. The buttons work OK, pedals and Thrustmaster shifter are all working perfectly, but I can't steer!! The wheel works fine in all other sims and the controller properties page ..... I must be missing something in RF2 ...... any advice please?

 

[Gijs van Elderen]

Did you assign your left steering and right steering input in rF2?

And FFB to wheel.

When you assign your left right steering input. Make sure you don't press any other buttons or pedals and H-shifter is in Neutral.

Start with your wheel in center.

 

[WhytedXL]

yep ...... if I choose "steer left", then turn the wheel left ..... nothing!! I escape out of that and the steer left option is now labelled "empty" ..... there is literally no output from the wheel whatsoever, yet I've just run some amazing laps of Silverstone in iRacing. I can't figure out why the buttons all work, the the X Axis is giving me nothing!!

 

[Mat Holloway]

Whyted, pretty sure I had something similar and it was because I loaded the wrong profile.
Load the porsche wheel profile again and see if that helps.

 

[WhytedXL]

It's baffling me ..... I've loaded and re-loaded ..... just can't work it out!! Thanks for the suggestions so far though

 

[Kevin Cox]

Is your wheel plugged into USB 3 or USB 2? I had problems in the past plugging my T500 into USB 3 and once I moved it to USB 2 all was ok.

 

[WhytedXL]

Thanks Kevin, that makes sense given that I recently updated USB drivers

 

[David O'Reilly]

Is your wheel plugged into USB 3 or USB 2? I had problems in the past plugging my T500 into USB 3 and once I moved it to USB 2 all was ok.

same here with Fanatec CSR