£220 +£10 Postage UK Only
I am selling one of the original Fanatec Universal Hubs (not the xbox one)
It will come with a new Motamec 10.5" (it appears to measure between 10.5 & 11.0") Suede rim fitted.
Includes the large shifters and the little flappy paddle ones.
NOTE: I used to have a home made 3d printed f1 wheel attached to this and I had to drill out the threaded diameter 70 pcd holes to fit it. Just be aware that if you do want to attach a rim with holes that are on a daiametr 70 pcd rim you will need to attach with a nut from behind. Its no big deal but its better that I make it known. I will include spare m5 nuts and socket head cap screws.
Please also not that i replaced the square headed screws that came with the wheel with good quality stainless steel socket head cap screws. The ones supplied were soft as butter. This does mean that the attached wheel rests against the top of the cap screws when fitted but it hasnt been a problem for me. I also replaced the long screws that hold the plate to the main hub with better quality ones as they were also very soft.
Untitled by JAMES ROBERTSON, on Flickr
Untitled by JAMES ROBERTSON, on Flickr
Untitled by JAMES ROBERTSON, on Flickr
Untitled by JAMES ROBERTSON, on Flickr
Untitled by JAMES ROBERTSON, on Flickr
Untitled by JAMES ROBERTSON, on Flickr
Untitled by JAMES ROBERTSON, on Flickr]
Untitled by JAMES ROBERTSON, on Flickr
Untitled by JAMES ROBERTSON, on Flickr
Untitled by JAMES ROBERTSON, on Flickr
I am selling one of the original Fanatec Universal Hubs (not the xbox one)
It will come with a new Motamec 10.5" (it appears to measure between 10.5 & 11.0") Suede rim fitted.
Includes the large shifters and the little flappy paddle ones.
NOTE: I used to have a home made 3d printed f1 wheel attached to this and I had to drill out the threaded diameter 70 pcd holes to fit it. Just be aware that if you do want to attach a rim with holes that are on a daiametr 70 pcd rim you will need to attach with a nut from behind. Its no big deal but its better that I make it known. I will include spare m5 nuts and socket head cap screws.
Please also not that i replaced the square headed screws that came with the wheel with good quality stainless steel socket head cap screws. The ones supplied were soft as butter. This does mean that the attached wheel rests against the top of the cap screws when fitted but it hasnt been a problem for me. I also replaced the long screws that hold the plate to the main hub with better quality ones as they were also very soft.
Untitled by JAMES ROBERTSON, on FlickrUntitled by JAMES ROBERTSON, on FlickrUntitled by JAMES ROBERTSON, on FlickrUntitled by JAMES ROBERTSON, on FlickrUntitled by JAMES ROBERTSON, on FlickrUntitled by JAMES ROBERTSON, on FlickrUntitled by JAMES ROBERTSON, on Flickr]Untitled by JAMES ROBERTSON, on FlickrUntitled by JAMES ROBERTSON, on FlickrUntitled by JAMES ROBERTSON, on Flickr
Last edited:
