Wanted Fanatec v2 main board pcb.

[Conny Naslund]

Does anyone have a spare main board (pcba) for the CSP v2 as my has broken. A shame to throw away an otherwise fully operational pedalset. It drops calibration after 3-4 minutes.
Fanatec has discontinued the V2 and does not have any spares left anymore.

 

[Paul Jeffrey]

Does anyone have a spare main board (pcba) for the CSP v2 as my has broken. A shame to throw away an otherwise fully operational pedalset. It drops calibration after 3-4 minutes.

Hi Conny,

I have a set of V2's that are in need of a hall and load sensor, drop me a PM chap if you are interested and we can maybe sort something out

Cheers

P

 

[alfye20]

Meanwhile try putting washers between chassis and PCB plate.
Mine (have a pair of V1) failed the same after changing sensors and others. The problem was that the footrest pressed on the capacitors and after a few minutes of play (pressure) random pedals starts to fail (not returning to 0% or not reaching 100%)

Notticed this when inverted and no pressure on the footrest.