Flat6 Series rF2 by EnduRacers & GR

[klo-che]

Complete NEWS : http://www.enduracers.com/newsletter_51.html

EnduRacers & GR are today delivering to you the build 5.00 of our Flat6 Series rF2 mod.

BUILD 5.00 - CHANGELOG
* AI : Updated cars icons.
* GRAPHICS : Updated Rims & Tires specular.
* GRAPHICS : Added position plates.
* GRAPHICS : Corrected crash in showroom.
* PHYSICS : Tire updated (based on latest S397 reference used on official DLC).
* PHYSICS : Aero adjusted (to finetune after tires integration).
* PHYSICS : Tire wear adjusted.
* PHYSICS : Tire pressure adjusted.
* PHYSICS : Default setup adjusted (don't reuse old setups).
* PHYSICS : IA performances and stability fixed.
* PHYSICS : Crash at high speed fixed.
* PHYSICS : FFB power adjusted.
* PHYSICS : Brake pressure is now adjustable.
* PHYSICS : Method to check laptimes vs real laptimes changed to be closer than real time with rubbered tracks.
* PHYSICS : Rear wing steps passed from 10 to 20 to allow more finetune in setup.
* PHYSICS : Brake power and balance adjusted.
* PHYSICS : Some aero finetunes.

MOD - DOWNLOADS
* Flat6 Series rF2 STEAM WORKSHOP : https://steamcommunity.com/sharedfiles/filedetails/?id=587034279
* Flat6 Series rF2 build 5.00 rfcmp : https://mega.nz/#!tkYFwYQB!3iJpXywWaIsh0GxNupUvyEElDhifrEPW2Zsm3xQDtls
* Flat6 Series rF2 build 5.00 rfcmp : https://www.mediafire.com/file/287pp9qm35nq5cw/ER_F6rF2-v500.rfcmp

MOD - INFORMATIONS
* Flat6 Series rF2 MOD Information : http://www.enduracers.com/flat6rf2.html
* Flat6 Series rF2 MOD Installation : http://www.enduracers.com/downloads_flat6rf2.html
* The Flat6 series has to be driven with degressive braking technics like in real race cars.
* The Flat6 Series has no driving help (NO ABS, NO Traction Control). They are disabled in the mod.
* The cars has been beta tested on several hardware and driving wheels brands (Logitech G25/27/DFGT, Thrustmaster T300/T500, Fanatec ClubSport) and is calibrated to work with all.
* If needed you can adjust FFB power using the FFB Upgrade in game tuning options of the car.

THE CAR - FLAT6 GT3
* Engine: 3,797 cc; stroke 76.4 mm; bore 102.7 mm diameter.
* Power: 450 hp at 7,500 rpm.
* Max RPM: 8,500 rpm.
* Gearbox: Six-speed sequential dog-type gearbox (G97/63) with active oil cooling and pressure-oil lubrication.
* Brakes: Aluminium six-piston calipers, in red at front, 380mm. Aluminium four-piston calipers, in red at rear, 355mm.
* Suspension: McPherson strut-type axle, height-adjustable.
* Tank capacity: 100 Liters.
* Weight: 1160 kg.

TRAILER

 

[David O'Reilly]

Cant wait, I can feel a 4 way comparison coming up between BES, Apex, URD and Flat 6.
If you can get and manage a little opposite lock on corner exit you will have a fan.
Please get the weight distribution right and give us full diff adjustment.
Good luck and god speed.

 

[klo-che]

Website : http://www.enduracers.com/flat6rf2.html

The Flat6 Series rF2 build 1.00 for rFactor2 as standalone mod is now available !

The Flat6 GT3 cup car is featured with a high detailled quality model, with lot of details and accuracy for a perfect immersion like in the real car. The cockpit is full of details, the most beautiful paint shemes from the series around the world from the years 2010 to 2013 are included. The car comes with 2 types of sounds, several types of rims.

The move over rF2 allows more features to be included, such as animated driver, deformable tyres, advanced physics and tyres behavior, and of course a complete refreshment of the reflects, lights and shadings compared to the rF1 version.


MOD - LINKS & DOWNLOADS
* MOD build v1.00 rfcmp : https://www.dropbox.com/s/nt2y5ddk5fv106v/ER_F6rF2-v100.rfcmp?dl=0
* MOD build v1.00 rfcmp : https://mega.nz/#!1tQTQZwD!0Q9gsB_mkfmMgGIBSIRoDexevl5UzVeUP85dzQKROVk
* MOD build v1.00 rfcmp : http://www.mediafire.com/download/0ny9iovq50hpt9q/ER_F6rF2-v100.rfcmp
* MOD build v1.00 rfcmp STEAM WORKSHOP : https://www.dropbox.com/s/nt2y5ddk5fv106v/ER_F6rF2-v100.rfcmp?dl=0
* MOD build v1.00 rfmod for leagues : https://www.dropbox.com/s/xv4f402dh5vr7d1/RaceEvent_Flat6_Series_on_ISI_Tracks_v1.00.rfmod?dl=0
* MOD rFM for leagues : https://www.dropbox.com/s/a8g212qo3pw39dl/ER_F6rF2_rFm.rar?dl=0
* TEMPLATE Flat6 GT3 : https://www.dropbox.com/s/4i33lko8izlu0cw/Enduracers_Template_ESGT3_Flat6GT3.rar?dl=0

MOD - FEATURES
* Graphics : High fidelity 3D model, with high definition cockpit.
* Graphics : 50 paints shemes inspired from the real cars.
* Graphics : Highly improved car materials, live reflections, dynamic lightnings and shadings.
* Graphics : Animated car driver, with high definition 3D Helmet. Special thanks to Coutie for the job.
* Graphics : Car details with backfire, headlights with Some1 lens flares shaders.
* Physics : Accurate car physics, created in collaboration with Gentlemen Racers physics team, with help from real teams and drivers.
* Physics : New rF2 deformable tire model, without CPM (still in development).
* Physics : Ultra chassis technology.
* Physics : Aero updated to match to rF2 improvements.
* Physics : FFB adjustment to match to rF2 engine.
* Physics : Suspension geometry improved.
* Physics : Rain tires.
* Sounds : Accurate and detailed sounds.
* Sounds : Up to date rF2 sounds features.

MOD - WORK IN PROGRESS
* Tire new CPM model.
* Damage fine tuning (Need deformations not yet implemented in rF2 to calibrate realistic damage values).
* Animated wipers in cockpit.
* Heat effect.

MOD - INFORMATIONS
* The Flat6 Series has no blip, you need to make heals/toes technique on braking/down shifting phases.
* The Flat6 series has to be driven with degressive braking technics like in real race cars.
* The Flat6 Series has no driving help (NO ABS, NO Traction Control). They are disabled in the mod.
* The cars has been beta tested on several hardware and driving wheels brands (Logitech G25/27/DFGT, Thrustmaster T300/T500, Fanatec ClubSport) and is calibrated to work with all.
* If needed you can adjust FFB power using the FFB Upgrade in game tuning options of the car.

THE CAR - FLAT6 GT3
* Engine: 3,797 cc; stroke 76.4 mm; bore 102.7 mm diameter.
* Power: 450 hp at 7,500 rpm.
* Max RPM: 8,500 rpm.
* Gearbox: Six-speed sequential dog-type gearbox (G97/63) with active oil cooling and pressure-oil lubrication.
* Brakes: Aluminium six-piston calipers, in red at front, 380mm. Aluminium four-piston calipers, in red at rear, 355mm.
* Suspension: McPherson strut-type axle, height-adjustable.
* Tank capacity: 100 Liters.
* Weight: 1160 kg.

TRAILER

 

[David O'Reilly]

Merry Xmas, xxxxxxxxxxxxxxxxxxxx

(Edit) I just drove my first laps at Bathurst.
You have nailed it.

 

[JeffL]

Merry Xmas,oooooooooooooooooo

 

[Lorenzo Bonder]

Forgive my swearing, but...

F*** yes, merry xmas, eeeeeeeeeeeeeeeeeeeeeeeeee

 

[Ace King]

First of all, thankyou for this much anticipated Porsche, what a awesome Christmas gift !!

 

[Simon Christmann]

Merry Xmas, xxxxxxxxxxxxxxxxxxxx

(Edit) I just drove my first laps at Bathurst.
You have nailed it.

Its awesome.
Did also some laps there

 

[JoelGL]

Any other link? As the dropbox link is disabled.

 

[Ace King]

Any other link? As the dropbox link is disabled.

https://goo.gl/jP9ZX6

 

[Patrick Moore]

Will this be going up on steam workshop?

 

[klo-che]

Will this be going up on steam workshop?

yes we will add it in few days.

 

[Dave_6]

I'm a noob at installing mods for RF2 and I have the Steam version. Can someone please clarify to how and where I need to install this?

 

[Michael Hornbuckle]

Drop all three files here:
:\Program Files (x86)\Steam\steamapps\common\rFactor 2\Packages

Then install in the menu that opens when you start the game.

 

[Gijs van Elderen]

I'm a noob at installing mods for RF2 and I have the Steam version. Can someone please clarify to how and where I need to install this?

- Download the .rar file
- Unrar it
- drop the .rfcmp (car-package file) into your packages folder
- open the rF2 launcher
- click on "the box"
- search for the uninstalled packages
- click on the flat6 package
- click on install.

Same for the .rfmod file (=RaceEvent)

 

[JoelGL]

Nice, thanks. Noob question, what's the difference between the non-league and league package? I presume the templates are just for skins?

 

[Martin Vindis]

Nice, thanks. Noob question, what's the difference between the non-league and league package? I presume the templates are just for skins?

I'm not sure about this but I think the non-league package comes without skins as teams usually paint their own cars anyway.

 

[Dave_6]

Thanks guys! Got it working now.

 

[Miroslav Davidovic]

- Download the .rar file
- Unrar it
- drop the .rfcmp (car-package file) into your packages folder
- open the rF2 launcher
- click on "the box"
- search for the uninstalled packages
- click on the flat6 package
- click on install.

Same for the .rfmod file (=RaceEvent)

Or get this tool, download mod and right click install.

http://isiforums.net/f/showthread.php/18947-MAS-file-extractor-rfcmp-Installer-URL-handler

 

[Patrick Moore]

yes we will add it in few days.

awesome! I'm a spaz with software and found the steam workshop to be a gift sent by Allah to allow me to enjoy rf2!