DiRT Rally Ford Fiesta RS WRC 2011-2012 Hirvonen + Latvala 1.1

[Deleted member 216626]

meerkat80 submitted a new resource:

Ford Fiesta RS WRC 2012 Latvala - Latvala's Fiesta RS WRC 2012

Car: Ford Fiesta RS WRC
Year: 2012
Drivers: Latvala/Anttila
Rally: generic
Installation folder: DiRT Rally\cars\models\ffr\livery_44\textures_high
Version: 0.9
Released:
Author & contacts: meerkat80 (aka rivers); rallymeerkat.wordpress.com; http://www.racedepartment.com/members/meerkat80.216626/

Description:
2012 version of the official Fiesta RS WRC.
It's marked v0.9 because I'm still figuring out how to make the "matte exagons". They barely show on real stage picture, and are...

Read more about this resource...

 

[Sébastien Degraeve]

Thx meerkat80.

 

[Sébastien Degraeve]

meerkat80
"It's marked v0.9 because I'm still figuring out how to make the "matte exagons". They barely show on real stage picture, and are more visible in the press photo shoot but still I can't see them very well."

What do you mean by "matte exagons"?

 

[Deleted member 216626]

meerkat80
"It's marked v0.9 because I'm still figuring out how to make the "matte exagons". They barely show on real stage picture, and are more visible in the press photo shoot but still I can't see them very well."

What do you mean by "matte exagons"?

If you look you can see them on the hood, on the trunk, rear bumper and even on the wheel arches: http://pictures.topspeed.com/IMG/crop/201201/2012-ford-fiesta-rs-wrc_1280x0w.jpg
One may think they are some kind of odd studio reflections, but there are some real stage pics in which you can (barely) see them too.

PS
thanks for the messages about the front light, I'll fix the texture for version 1.

 

[Sébastien Degraeve]

I had not noticed this detail on the livery.

 

[TAKbooh]

http://www.1999.co.jp/itbig20/10203530a.jpg

 

[Deleted member 216626]

Damn exagons :I

 

[NeOOnE]

Hello meerkat, Excellent work on the livery. I suggest if you have photoshop to do a "hexagon" layer in between the wrc/ ford logo and the hood and either use a vector or select tool to create the hexagon pattern, do a fill and do a boolean subtract for the hex grids. You could play with the transparency on the "hexagon" layer as you see fit. Similarly you can possibly copy your hex layer and scale and rotate that layer to match your image for the other parts of the car. Wish I could help don't have photoshop anymore and wanted to do the old and newer cars that I've always liked. I just recently playing again including the old CMR series seems like the old High Gear and Black Hole Motorsport forums are all gone where I was active once. Anyway hope to see you finish it.

 

[Deleted member 216626]

Hello meerkat, Excellent work on the livery. I suggest if you have photoshop to do a "hexagon" layer in between the wrc/ ford logo and the hood and either use a vector or select tool to create the hexagon pattern, do a fill and do a boolean subtract for the hex grids. You could play with the transparency on the "hexagon" layer as you see fit. Similarly you can possibly copy your hex layer and scale and rotate that layer to match your image for the other parts of the car. Wish I could help don't have photoshop anymore and wanted to do the old and newer cars that I've always liked. I just recently playing again including the old CMR series seems like the old High Gear and Black Hole Motorsport forums are all gone where I was active once. Anyway hope to see you finish it.

Yes this is more or less how I started. The main problem is that I don't have good enough pictures to see where they are. If anyone could help me locate them all would be easier. Not much time to work on it now BTW. But it will be out one day I promise (with the chrome fix on the front lights).

 

[NeOOnE]

Hmmm now that you mentioned it it is hard to see those hex especially on the side near the tire well compared it to petter's car at that time seems its only latvala.

http://todofondosderallies.com/wp-content/uploads/images/45/ford-fiesta-rs-wrc.jpg

 

[NeOOnE]

I dont' know if you have these yet but...
Top view: (Its also on the roof different color hue)
http://gearheadsmag.com/wp-content/uploads/2012/01/25752.jpg

Side: (this one showed better than the first one front and rear tire wells, different scale on the back of the rear tire well)
http://gearheadsmag.com/wp-content/uploads/2012/01/25751.jpg

 

[Deleted member 216626]

Thanks for the pics. I have all the studio pictures, but they are not good enough

 

[NeOOnE]

Well good luck I'll check you back later

 

[Deleted member 216626]

meerkat80 updated Ford Fiesta RS WRC 2012 Latvala with a new update entry:

Fixed lights and rally plates

View attachment 106443 View attachment 106444 View attachment 106445 View attachment 106446
-added chrome parts to front light
-updated side number plate and added hood rally plate
-updated specocc texture

Read the rest of this update entry...

 

[jay_p_666]

Hi meerkat, I thought the reference pictures shared above were clear enough showing where some of the hexagons are, at least the most noticeable ones. Even if it's not perfect it's okay, but it's not the end of the world if they're not there...just wondering why finally you did not include some of them in v1.0

 

[Deleted member 216626]

Because there are no picture available that show the position of *all* the exagons. No plans to add them sorry.

 

[jay_p_666]

no problem, like I said earlier, those are minor details almost unnoticeable

 

[Deleted member 216626]

meerkat80 updated Ford Fiesta RS WRC 2012 Latvala with a new update entry:

Wheels + Hirvonen + etc.

-wheel textures
-new glass textures
-added Hirvonen 2011 livery (stock external plus updated wheels, glass and lights)

Read the rest of this update entry...

 

[Sébastien Degraeve]

 

[Deleted member 216626]

uploading the fix right now.
I knew I screwed something.