Cars Formula 3. Another mod. 1.0.0

[michele77]

michele77 submitted a new resource:

Formula 3. Another mod. - A Formula 3 mod.

This is a mod I downloaded somewhere years ago. I think it is an interesting mod, so I decided to upload it for everyone.

Read more about this resource...

 

[sergio hundo]

Thanks to share, michele77 ! This mod is hosted in site tt.servegame, maybe you got it from there.

 

[michele77]

Thanks to share, michele77 ! This mod is hosted in site tt.servegame, maybe you got it from there.

It seems a little different.

 

[michele77]

In my opinion the default setup is a little wrong. In fact, the front wing is setted to 11 while the right value should be 19 in my opinion. I've already submitted a new hdc file here:

Formula 3 - Update hdc

This is an update of the mod Formula 3 I've already uploaded. This update modify the setup: the front wing is now setted to 19. Here is the mod: https://www.racedepartment.com/downloads/formula-3-another-mod.38221/

www.racedepartment.com

Just replace the old file with the new one.

 

[michele77]

I think the engine is a little too powerful for me. I'll try to reduce the engine power next days even by creating a new engine file.

 

[michele77]

Because the engine seemed too powerful to me, I made some changes in the eng file using the program physicseditor. The engine hp passes from over 240 hp to around 220 hp. Then, I felt the car a little heavy. So I decided to decrese the load send in the tyre file a little.
Here are the changes:
eng file:
RPMTorque=( 0.0, -11.0, -11.0)
RPMTorque=( 250.0, -11.3, 18.5)
RPMTorque=( 500.0, -12.0, 52.6)
RPMTorque=( 1000.0, -13.0, 83.5)
RPMTorque=( 1500.0, -16.0, 120.8)
RPMTorque=( 2000.0, -18.5, 158.1)
RPMTorque=( 2500.0, -24.0, 191.7)
RPMTorque=( 3000.0, -29.0, 221.6)
RPMTorque=( 3500.0, -35.0, 239.0)
RPMTorque=( 4000.0, -43.9, 256.4)
RPMTorque=( 4500.0, -54.8, 262.7)
RPMTorque=( 5000.0, -65.0, 264.5)
RPMTorque=( 5500.0, -75.1, 259.0)
RPMTorque=( 6000.0, -86.0, 242.8)
RPMTorque=( 6500.0, -99.1, 222.9)
RPMTorque=( 7000.0, -114.3, 196.7)
RPMTorque=( 7500.0, -130.0, 166.7)
RPMTorque=( 8000.0, -148.4, 131.4)
RPMTorque=( 8500.0, -170.9, 79.9)
RPMTorque=( 9000.0, -195.6, 1.1)
RPMTorque=( 9500.0, -217.3, -120.0)

tyr file:
all the LoadSens entries from 13550.0 to 12550.0 (as minimum, I think not over 12050.0).

At the moment I'm quite happy with these new changes.

 

[michele77]

Well, 12550.0 seems to be too low. 13050.0 seems perfect to me.
That's all.

 

[sergio hundo]

Well, 12550.0 seems to be too low. 13050.0 seems perfect to me.
That's all.

Thanks, michele77. I will keep your suggest. It seems better for me too. Congratulations for your work !