I like the SF1, I just wish it wasn't so wide as I'm not particularly wide and wanted something snug. It's like they assume a sim racer will require extra width
honestly, though, unless you've got a motion rig, the side bolsters are mostly useless.
I have an early version of the Lusomotors rcc-mk8. That one needed some drilling and fabrication to get it mounted but nowadays they do have a version with readymade side mounting which should simplify the whole process of getting it attached
THanks for that.It is somewhat rough, though I haven't got much to compare it to. Here's a quick picture I just got from mine:
If you go to lusomotors' fb page, they have much better pictures there including two skin versions and custom ones they've made
It is somewhat rough, though I haven't got much to compare it to. Here's a quick picture I just got from mine:
If you go to lusomotors' fb page, they have much better pictures there including two skin versions and custom ones they've made
I like it a lot, it's tighter than my sparco pro2000 so it does give sort of climbing into a racecar feelIt's very subjective, but how comfortable do you find it?
sweating did become a problem on longer stints as the seat back doesn't breath.
Luso don't seem to be particularly fast to respond ATM. Was it difficult getting hold of them?
I got a reply asking about pad and stitching colours. Then I started looking at the customisation available and went down a rabbit hole.I'm also taking a look at buying a formula seat, and I just found out you can buy Luso seats here : https://www.formulasimrigs.com/home/SEATS-c59265011
It will not shorten the delay for the delivery, but at least you've got a form to customize and buy the seat.