G27 brake pedal dragging

Decenten

Driver of the #73 Team OGMRZ Holden V8SC
So my G27 started dragging the brake pedal. I recently upgraded the brake spring to the GTEYE progressive spring and now the throttle and the brake are having problems. The brake is on down the straights and the throttle doesnt stay full when put all the way down. Anyway to fix this?
 
Yep down that even set a deadzone and it still drags. I set it so I had to go past 25% to activate the brakes and it still was dragging
 
Upvote 0
I've cleaned my potentiometers, I use a star tech 3.0 usb hub for more usb device accuracy (connected to pc via usb, and to make it stronger, also plugged in to a power outlet), and I use leo bodnar usb cable for the pedals. All three above really helps with the accuracy of the pedals. Without these accessories and cleaning the pots, the pedals are always jumping or slightly pressed on their own.

If you recently took apart your pedals, make sure to double check to ensure that all parts are placed back tight and firm, nothing should be loose. My gas pedal was jumping, took it apart and found the small spring (not the pedal spring) was loose. So I placed it back firmly. All is ok now, hope this helps. I also have GTEYE installed
 
Last edited:
Upvote 0

Latest News

What would make you race in our Club events

  • Special events

    Votes: 79 28.9%
  • More leagues

    Votes: 55 20.1%
  • Prizes

    Votes: 59 21.6%
  • Trophies

    Votes: 34 12.5%
  • Forum trophies

    Votes: 18 6.6%
  • Livestreams

    Votes: 42 15.4%
  • Easier access

    Votes: 140 51.3%
  • Other? post your reason

    Votes: 42 15.4%
Back
Top