Hello everyone
So my trusty 3 year old g27 finally went off center by 1.22 degrees(checked via wheelcheck app) When i hold the wheel perfectly straight with my hands, it goes slightly right in game(assetto, rfactor2, iracing and pcars2)
So i carefully took apart the wheel, found the encoder(and holy ****ing hell logitech made a proper wheel, it was so hard to take apart) Looked at it, could not see a crack, looked at it via flashlight, held it under a lamp and looked up at it until i was blind. Not a thing. I don't have a magnifiying glass so i didn't do that.
Now considering the exchange rate in turkey is through the roof, i wanted to ask here first before buying the infamous brass encoder. I didn't see a crack on the encoder but some people say the crack may be too small to see just by looking at it. (this theory might be right, this issue reared its ugly head after i did some intense full lock to lock steering with the drm revival mod for a week every night, damn i love that mod)
So what to do? Should i buy the brass stuff from the dude at taiwan?
My only other option is breaking the bank and buying g29. T300 is out of my budget and i don't do used.
Oh oh i forgot to add another thing. for 3 years, my wheel used to stop dead straight after calibration. It used to calibrate and then wham! the wheel is perfectly aligned straight. But now, after this issue began, it no longer sits perfectly aligned right after calibration. It now stops slightly turned left.
So my trusty 3 year old g27 finally went off center by 1.22 degrees(checked via wheelcheck app) When i hold the wheel perfectly straight with my hands, it goes slightly right in game(assetto, rfactor2, iracing and pcars2)
So i carefully took apart the wheel, found the encoder(and holy ****ing hell logitech made a proper wheel, it was so hard to take apart) Looked at it, could not see a crack, looked at it via flashlight, held it under a lamp and looked up at it until i was blind. Not a thing. I don't have a magnifiying glass so i didn't do that.
Now considering the exchange rate in turkey is through the roof, i wanted to ask here first before buying the infamous brass encoder. I didn't see a crack on the encoder but some people say the crack may be too small to see just by looking at it. (this theory might be right, this issue reared its ugly head after i did some intense full lock to lock steering with the drm revival mod for a week every night, damn i love that mod)
So what to do? Should i buy the brass stuff from the dude at taiwan?
My only other option is breaking the bank and buying g29. T300 is out of my budget and i don't do used.
Oh oh i forgot to add another thing. for 3 years, my wheel used to stop dead straight after calibration. It used to calibrate and then wham! the wheel is perfectly aligned straight. But now, after this issue began, it no longer sits perfectly aligned right after calibration. It now stops slightly turned left.
Last edited: