GT omega cockpit frame free

Calvyn White · Mar 3, 2019

Does anybody want this? Pay for posting and its yours. No seat and a little banged up but perfectly functional. Has 4 support bars instead of the regular 2.
https://www.gtomegaracing.com/gt-om...s/gt-omega-pro-racing-simulator-cockpit-frame

Chris Sercombe · Mar 3, 2019

Hi mate, does any racing seat from a car fit this ?

Calvyn White · Mar 4, 2019

I would have thought so but I couldn't guarantee it. So I'll take some measurements and I'll let you know what they are and you can compare it. I will let you know as soon as I can.

Kenny Paton · Mar 4, 2019

Very generous offer Calvyn

Yetch · Mar 4, 2019

Yeah cheers @Calvyn White, just spent the best part of a month fettling my collection of scrap metal into something vaguely resembling a rig, finally getting everything bolted up and all Sims installed and working (including AMS) late Saturday night, only to wake up this morning and read your post, your timing is impeccable sir!

Now all I have to get right, to get back on the track is a shoulder that stays in its socket for longer than a 20 min race.

NHS solution, tie a piece of rubber balloon to a door handle and perform manoeuvres until shoulder pops out and repeat daily, give me strength, do they not realise I'm missing out on racing. Talk about saga, had the accident 10 years ago, in that time had 2 x-rays and 8 bouts of physio, not seen the same doc twice. Best bit is been referred to a specialist 4 times but all 4 cancelled. Nothing like being the lowest form of pond life in society!

Calvyn White · Mar 4, 2019

Sorry about the sloppiness but I didn't really have any time to faff about with it. The measurements are from the centre of nut to centre of nut.

UMC 22 · Mar 4, 2019

If I only had room for it...

Chris Sercombe · Mar 4, 2019

Calvyn White said:
View attachment 294864

Sorry about the sloppiness but I didn't really have any time to faff about with it. The measurements are from the centre of nut to centre of nut.

Thx for measurements mate, i not even got a seat, was just wondering what size would be needed, and if it is same size as real car bucket/sports seats, maybe someone else can answer that, obviously if someone else comes along and wants to take you up on your great offer, there have a bargain, cheers

Calvyn White · Mar 4, 2019

Ross Garland said:
If I only had room for it...

You can easily take it into 2 pieces. Two bolts and it literally is in half. It would half the length but if you were to put it side by side it be twice as wide obviously.

PS: Front half 34 inches, steering wheel and pedals. Seat half about the same length.

UMC 22 · Mar 4, 2019

Calvyn White said:
You can easily take it into 2 pieces. Two bolts and it literally is in half. It would half the length but if you were to put it side by side it be twice as wide obviously.

I have to deploy my racing rig and stow it away each time I race. That's why I'm stuck with a foldable Playseat Challenge for the foreseeable future.

Calvyn White · Mar 4, 2019

Chris Sercombe said:
Thx for measurements mate, i not even got a seat, was just wondering what size would be needed, and if it is same size as real car bucket/sports seats, maybe someone else can answer that, obviously if someone else comes along and wants to take you up on your great offer, there have a bargain, cheers

Well you can probably go to a car scrap yard and pick up a recently good seat for next to nothing. Other than that this is what you would need. Take note of the measurements beneath. I would suggest taking those measurements along to this car scrap yard and matching up. I can't tell you exactly what those measurements are for but I imagine the biggest one is the height. I also imagine none of these measurements are for the slide rails.
https://www.gtomegaracing.com/racing-seats-range/gt-omega-racing-rs6-seat-seat-sliders