High speed wheel oscillation

[Lesthegringo]

Guys, a week or so ago I updated the firmware and software for the SCL elite base I have, which reset my FFB settings.

As a starting point I went to Fanatec's recommended settings at set all those both in game and on the wheel, however I am getting significant wheel oscillation at high speeds, especially with any open wheel type cars. I have reduced the FFB to the point where I can barely feel anything, the DRI is off, DPR is at 100, yet I cannot lose the wheel shake.

The wheel base is firmly bolted to the rig using three bolts on a welded frame, so I know it is not made worse by that.

I am at the point where FFB is barely discernable, and still can't get rid of it, yet before the firmware and software upgrade I never had the issues. Is there a setting that I am missing?

Cheers

Les

 

[Michael Krone]

Does it happen while youre gripping the wheel? Or only when you let go? I have a CSW and if I let go the wheel violently wobbles back and forth. Just something I deal with. Only thing I have found to remedy this is messing with the drift settings to slow the wheel but I didnt like that much.

 

[Lesthegringo]

no, even when I am holding it, although holding on does attenuate it somewhat. But by the end of the straights I am struggling to keep the car in a straight line

Cheers

Les

 

[Lesthegringo]

Found this thread

Whats mean by Steer Assist in Ferrari F2002 setup menu ??

Thanks

www.racedepartment.com

by turning up the Steer Assist I made this a ton better - hopefully this helps others

Les

 

[Stereo]

Yeah that setting should be 100% I believe, anything else will cause really bad oscillation unless your wheel has a huge deadzone like G27s.

 

[Deleted member 197115]

Do you have Gyro enabled?

 

[Lesthegringo]

Gyro? I can't recall ever seeing that parameter anywhere

Cheers

Les

 

[Deleted member 197115]

 

[Neilski]

Found this thread

Whats mean by Steer Assist in Ferrari F2002 setup menu ??

Thanks

www.racedepartment.com

by turning up the Steer Assist I made this a ton better - hopefully this helps others

I got scared cos I had a feeling that mine was set to 0. But apparently, 0 is the same as 100%...

 

[Lesthegringo]

View attachment 425257

Can you tell me where you get this screen? I can't find it anywhere in the version of Assetto Corsa that I have

Cheers

Les

 

[Deleted member 197115]

Can you tell me where you get this screen? I can't find it anywhere in the version of Assetto Corsa that I have

Cheers

Les

Content Manager.
You can achieve the same by modifying this line in assettocorsa\system\cfg\assetto_corsa.ini

[FF_EXPERIMENTAL] ENABLE_GYRO=1

 

[Lesthegringo]

Ok, I get it - it never ocurred to me to look in content manager

Thanks

Les