At
Code:
[MATERIAL_ADJUSTMENT_...]
ACTIVE = 1
CONDITION = RACING_FLAG_00
;INPUT=FLAG_TYPE
;MESHES = digiflag
MATERIALS= digiflag
KEY_0 = ksEmissive
VALUE_0 = 255, 255, 255, 0.2
KEY_1 = ksDiffuse
VALUE_1 = 0
You could probably add:
Code:
VALUE_0_OFF = 0,255,0,0.2
VALUE_1_OFF = 0
Not sure if it works as you'd like, but it sounds logical
Oh sorry i forgot to delete it, well i fixed that pretty easy tbh
LUT==(0=1,0,1||1=0,0,0|2=1,1,0|3=1,0,0|4=1,0,0|5=1,0,0|6=1,0,0|7=1,0,0|8=1,0,0|9=1,0,0|10=1,0,0|11=1,0,0|12=0,0,1|13=0,0,0|14=1,1,1|)
i changed 1=0,1,0 bc this describes the green flag and i changed the colour from black to green...
the other thing i dunno why its not working is 13 is race over and i want it to flash red (because chequered flag is not all the same colour) so i changed it to 13=1,0,0 but it doesnt work it flashes green. And the white flag is also not shown (LUT=14...), tho it did work sm time before i made the canges in the script.
Your code works, however it doesnt flash as it is described as permanent and has no flashing comms.
Maybe you have an idea on how to change that it shows the race over flag and the white flag for last lap
Yours, Stone