WheelCheck.. FCM tool Lut Converter.. FFBClip App .. tried them all . . and wasted alot of time testing pretty much every guide out there.. till i was like.. ok . time to think.. and not replicate things like a parot.. and VIO LA.. never been so good before. Let me know how it works out for ya. Enjoy !
G27 Owners .. simplicity is DEVINE!
The confusion and frustration of the G27 not being a good wheel and the pain to set it up correctly.. its your christmas today.. try.. and thank me later.
Without going into once again confusing technical details.. straight forward.
1)
120% in oder to eliminated the "deadzone behaviour" or interfacing bug of the G27 completly - just by doing that
40% - 55% dampening, because otherwise your wheel will turn loose if car isn´t rolling. Standing rubbers still provide resistance on the steering wheel. ( i have to in 70% as the not roll resistance should be higher than the slow roll one)
2)
Under C:\Users\UserName\Documents\Assetto Corsa\cfg in the controls.ini file edit like this:
[STEER]
JOY=0
AXLE=0
SCALE=1
LOCK=855
FF_GAIN=1
FILTER_FF=0.6
STEER_GAMMA=1
STEER_FILTER=0
SPEED_SENSITIVITY=0
MIN=0
MAX=0
DEBOUNCING_MS=5
[FF_TWEAKS]
MIN_FF=0
CENTER_BOOST_GAIN=0
CENTER_BOOST_RANGE=0
[FF_ENHANCEMENT] (or 0 them out.. and do by car individually)
CURBS=0.15
ROAD=0.05
SLIPS=0.1
ABS=0.05
[FF_ENHANCEMENT_2]
UNDERSTEER=1
3)
Create a file Linear.txt file in the C:\Users\UserName\Documents\Assetto Corsa\cfg folder, open it with notepad or editor and add:
0.00|0.00
0.02|0.02
0.04|0.04
0.06|0.06
0.08|0.08
0.10|0.10
0.12|0.12
0.14|0.14
0.16|0.16
0.18|0.18
0.20|0.20
0.22|0.22
0.24|0.24
0.26|0.26
0.28|0.28
0.30|0.30
0.32|0.32
0.34|0.34
0.36|0.36
0.38|0.38
0.40|0.40
0.42|0.42
0.44|0.44
0.46|0.46
0.48|0.48
0.50|0.50
0.52|0.52
0.54|0.54
0.56|0.56
0.58|0.58
0.60|0.60
0.62|0.62
0.64|0.64
0.66|0.66
0.68|0.68
0.70|0.70
0.72|0.72
0.74|0.74
0.76|0.76
0.78|0.78
0.80|0.80
0.82|0.82
0.84|0.84
0.86|0.86
0.88|0.88
0.90|0.90
0.92|0.92
0.94|0.94
0.96|0.96
0.98|0.98
1.00|1.00
There you go, you wanted a linear G27.. there you have it now.
After that, rename the Linear.txt file to " Linear.lut" (lima, utha, tango) and save it.
4)
Open the ff_post_process.ini file and change it to:
[HEADER]
VERSION=1
TYPE=LUT
ENABLED=1
[GAMMA]
VALUE=1
[LUT]
CURVE=Linear.lut
5)
Open the assetto_corsa.ini file under :\Steam\steamapps\common\assettocorsa\system\cfg and make sure the following part look like this
[FORCE_FEEDBACK]
FF_SKIP_STEPS=1
[FF_EXPERIMENTAL]
ENABLE_GYRO=0
DAMPER_MIN_LEVEL=0.0
DAMPER_GAIN=1.0
6)
ingame should now look like this:
Here you can also use 60-70% as GAIN Main and Filter ZERO !!
G27 Owners .. simplicity is DEVINE!
The confusion and frustration of the G27 not being a good wheel and the pain to set it up correctly.. its your christmas today.. try.. and thank me later.
Without going into once again confusing technical details.. straight forward.
1)
120% in oder to eliminated the "deadzone behaviour" or interfacing bug of the G27 completly - just by doing that
40% - 55% dampening, because otherwise your wheel will turn loose if car isn´t rolling. Standing rubbers still provide resistance on the steering wheel. ( i have to in 70% as the not roll resistance should be higher than the slow roll one)
2)
Under C:\Users\UserName\Documents\Assetto Corsa\cfg in the controls.ini file edit like this:
[STEER]
JOY=0
AXLE=0
SCALE=1
LOCK=855
FF_GAIN=1
FILTER_FF=0.6
STEER_GAMMA=1
STEER_FILTER=0
SPEED_SENSITIVITY=0
MIN=0
MAX=0
DEBOUNCING_MS=5
[FF_TWEAKS]
MIN_FF=0
CENTER_BOOST_GAIN=0
CENTER_BOOST_RANGE=0
[FF_ENHANCEMENT] (or 0 them out.. and do by car individually)
CURBS=0.15
ROAD=0.05
SLIPS=0.1
ABS=0.05
[FF_ENHANCEMENT_2]
UNDERSTEER=1
3)
Create a file Linear.txt file in the C:\Users\UserName\Documents\Assetto Corsa\cfg folder, open it with notepad or editor and add:
0.00|0.00
0.02|0.02
0.04|0.04
0.06|0.06
0.08|0.08
0.10|0.10
0.12|0.12
0.14|0.14
0.16|0.16
0.18|0.18
0.20|0.20
0.22|0.22
0.24|0.24
0.26|0.26
0.28|0.28
0.30|0.30
0.32|0.32
0.34|0.34
0.36|0.36
0.38|0.38
0.40|0.40
0.42|0.42
0.44|0.44
0.46|0.46
0.48|0.48
0.50|0.50
0.52|0.52
0.54|0.54
0.56|0.56
0.58|0.58
0.60|0.60
0.62|0.62
0.64|0.64
0.66|0.66
0.68|0.68
0.70|0.70
0.72|0.72
0.74|0.74
0.76|0.76
0.78|0.78
0.80|0.80
0.82|0.82
0.84|0.84
0.86|0.86
0.88|0.88
0.90|0.90
0.92|0.92
0.94|0.94
0.96|0.96
0.98|0.98
1.00|1.00
There you go, you wanted a linear G27.. there you have it now.
After that, rename the Linear.txt file to " Linear.lut" (lima, utha, tango) and save it.
4)
Open the ff_post_process.ini file and change it to:
[HEADER]
VERSION=1
TYPE=LUT
ENABLED=1
[GAMMA]
VALUE=1
[LUT]
CURVE=Linear.lut
5)
Open the assetto_corsa.ini file under :\Steam\steamapps\common\assettocorsa\system\cfg and make sure the following part look like this
[FORCE_FEEDBACK]
FF_SKIP_STEPS=1
[FF_EXPERIMENTAL]
ENABLE_GYRO=0
DAMPER_MIN_LEVEL=0.0
DAMPER_GAIN=1.0
6)
ingame should now look like this:
Here you can also use 60-70% as GAIN Main and Filter ZERO !!
Last edited: