MoTeC displaying wrong values

[MarceloCastro]

So I've setup the ACTI telemetry interface, but it seems that MoTeC is displaying the wrong values. I've tested it with the Lotus T125 Exos S1 @ Mugello, but the ride height reading appears to be wrong. The floor is hitting the ground, but on MoTeC it shows that it still is around 30mm clear.

Any help?

 

[PhilS13]

Ride height in Motec is longitudinally at the axles and laterally at the car centerline so you will almost never get the relation : 0mm in MoTec = car scraping.

Doesn't mean the car is right, it can still be off but what you described is normal.