Mount for Button Box

[KrasserDude]

Hey Guys, i want to mount my Button Box on my Alu Profile Rig in the Position like shown in the Picture. The Holes are back and the Button Box is 60 cm deep. The Problem is, that i want to mount it on top of my 40x80, which is why i cant just get a metal plate and bolt that on the alu profil and the box. I would love some nice ideas. I also have an 3d-Printer, if someone has some ideas to print. Thank you very much

 

[EsxPaul]

Your button box looks like it has metal inserts that are placed in the correct positions for vesa mounting. You'd have to check the measurements to make sure though.

I'm using one of these (in a different place on my rig) but I think it could work out well for the position you want.

 

[KrasserDude]

Your button box looks like it has metal inserts that are placed in the correct positions for vesa mounting. You'd have to check the measurements to make sure though.

I'm using one of these (in a different place on my rig) but I think it could work out well for the position you want.

Thats a very nice idea. The inserts are not in the right position for a vesa mount, but i could drill some new holes into the mount. Thats the best solution i have until now, thank you very much

 

[Elaphe]

I made this design for 3D printing. It makes my button box face my position with some vertical angle and can also be rotated. If you want the model, ask me.

 

[Mason Gregg]

I made this design for 3D printing. It makes my button box face my position with some vertical angle and can also be rotated. If you want the model, ask me.

Can you share the file for this? Looks awesome man!

 

[Elaphe]

Can you share the file for this? Looks awesome man!

Grab the .stl from here.

All my 3D files are public and available in Tinkercad (online CAD program for dummies). Look for people: Elaphe. There's a lot of stuff there and you may find something interesting.

 

[monzi604]

I made this design for 3D printing. It makes my button box face my position with some vertical angle and can also be rotated. If you want the model, ask me.

Can you share the file for this? Looks awesome man!