Mounting TM T3PA-Pro pedals to a rig?

[Spinelli]

I'm trying to figure out how to mount Thrustmaster T3PA-Pro pedals (in default/F1 position) to my Sim-Labs P1 cockpit. It looks like the mounting holes of the Thrustmaster pedals are only accessible from the bottom of the pedals. How am I supposed to mount it to aluminum profiling/extrusion if that's the case?

 

[Xr4eyes]

I use a bracket like this
https://www.motedis.co.uk/shop/Mech...e-galvanised-40-I-Type-slot-8::999991302.html

Or you could mount the pedals to a wooden basem, then bolt the wood to the profile

 

[Spinelli]

I use a bracket like this
https://www.motedis.co.uk/shop/Mech...e-galvanised-40-I-Type-slot-8::999991302.html

Or you could mount the pedals to a wooden basem, then bolt the wood to the profile

Hi. I have the same type of brackets except they aren't countersunk. Where do you attach those brackets?

 

[Xr4eyes]

One side bolts to the pedals and the other to the inside of the profile.
I'll take a picture when I get home later

 

[Spinelli]

One side bolts to the pedals and the other to the inside of the profile.
I'll take a picture when I get home later

Thank you.

 

[Spinelli]

I got them bolted with the 90 degree brackets that come with my P1 cockpit. It's only 1 bolt for each pedal instead of 2 (the pedals have 2 holes for each pedal) because the brackets are too wide but this will work for now. Hopefully when I add the TM conical brake mod (or other mods) for more force, the 1 bolt for each pedal will still be enough.