I was heavily inspired by the builds on this page and thought I'd document the process. I chose Motedis as my vendor. They have a few "predesignated" part kits. A base cockpit frame, a pedal frame, and a seat frame. In the end, I would up not using the seat frame. I did order a couple extra 1m sticks of 6030 and a .5m stick of 6030. Below is what I came up with. I'll also attach the invoice from Motedis, in case anyone wants to duplicate my efforts. Next up will be adding SFX-1000 motion and VR (maybe an Index?).