OSW setting help please :(

[ricerracer]

Hi all I have

• SimuCUBE based OSW kit SinCos
• ServoMotor: MiGE 130ST-M15015 SinCos - 2,1 mil cpr
• PSU: Mean Well 480W/720W Peak (Noiseless) 30Nm
• Servo drive: Ioni Pro HC (25A)

and I am struggling to get the settings correct, so was wandering if people could share there in game and MMosForceFeedback settings please? Thank you.

 

[Gergo Panker]

Hi,

I have an Argon-based OSW, but here are my settings.

MMos

Overall Filter: 5-8 depending on the car, 5 might be too low for certain vintage cars, I found 8 as a good baseline.

In the system/cfg/assetto_corsa.ini:

(This is optional but I massively prefer the feel with gyro and it gets rid of the oscillation around the centre)

AC properties:

Effects are subjective, I like a bit of enhanced Kerb effect, some prefer 0% on all. I'm undecided about the ABS effect, I might get rid of it eventually.

In-game I set 60%-110% with the +/- keys depending on the car.

 

[ricerracer]

Hi,

I have an Argon-based OSW, but here are my settings.

MMos

Overall Filter: 5-8 depending on the car, 5 might be too low for certain vintage cars, I found 8 as a good baseline.

In the system/cfg/assetto_corsa.ini:

(This is optional but I massively prefer the feel with gyro and it gets rid of the oscillation around the centre)

AC properties:

Effects are subjective, I like a bit of enhanced Kerb effect, some prefer 0% on all. I'm undecided about the ABS effect, I might get rid of it eventually.

In-game I set 60%-110% with the +/- keys depending on the car.

Thanks mate but 1108 of rotation? Bit much? 900 seems about right

 

[ricerracer]

Hi,

I have an Argon-based OSW, but here are my settings.

MMos

Overall Filter: 5-8 depending on the car, 5 might be too low for certain vintage cars, I found 8 as a good baseline.

In the system/cfg/assetto_corsa.ini:

(This is optional but I massively prefer the feel with gyro and it gets rid of the oscillation around the centre)

AC properties:

Effects are subjective, I like a bit of enhanced Kerb effect, some prefer 0% on all. I'm undecided about the ABS effect, I might get rid of it eventually.

In-game I set 60%-110% with the +/- keys depending on the car.

Also just wondering what do the road effects actually do

 

[Gergo Panker]

Thanks mate but 1108 of rotation? Bit much? 900 seems about right

Some cars have more than 900 degrees of rotation, such as the Miura and other road cars. It doesn't matter though, it'll always apply the correct rotation ingame if you do the configuration wizard correctly in the UI. If you set it 900, in some cars your steering will be limited at extreme steering angles.

 

[Gergo Panker]

Also just wondering what do the road effects actually do

Road and slip effects amplify these respective forces in the FFB. Imagine them as the EQ on your stereo, they boost certain "frequencies", in these case road and tyre slip. Kerb and ABS effects add "canned" vibration when you're on kerb or when the ABS is working.

 

[Deleted member 197115]

@Gergo Panker, does DAMPER_MIN_LEVEL=0.01 (1%) do anything?