Cars [PHYSICS] Peugeot 405 T16 Pikes Peak 0.84

FNNTRVRT · Mar 17, 2022

FNNTRVRT submitted a new resource:

Peugeot 405 T16 Pikes Peak - Data Replacement - Updated data.acd for Peugeot 405 T16 Pikes Peak

View attachment 550368Meant to replace the data for the Peugeot 405 T16 Pikes Peak, which was originally from RallyWorld and then updated by AssettoRallyGRB.

Physics have been reworked using available sources albeit some issues due to lack of available information.

Help on the following would be incredibly appreciated.
- Torque Curve follows 205 T16 Evo 2. But power has been adjusted (520hp-13% drivetrain loss). If anyone have any info on 405 T16 Pikes Peak torque curve, do...

Read more about this resource...

FNNTRVRT · Mar 25, 2022

FNNTRVRT updated Peugeot 405 T16 Pikes Peak - Data Replacement with a new update entry:

ctrl_4ws and power.lut reworked

Error made on my part on the ctrl_4ws. Was supposed to be 1/3 instead of 3x.

Uprated power.lut to 650hp-13% drivetrain loss

Drag values have been adjusted to still replicate 0-200km/h in 10s.

Doubled the rear slip ratio

Edited & added name and short name in tyres.ini

Read the rest of this update entry...

FNNTRVRT · Mar 27, 2022

FNNTRVRT updated Peugeot 405 T16 Pikes Peak - Data Replacement with a new update entry:

ctrl_4ws.ini and steer ratio reworked

Steer ratio is now based on the Peugeot 205 T16 Evo 2 values. Ctrl_4ws have been reworked due to it.

Read the rest of this update entry...

FNNTRVRT · May 18, 2022

FNNTRVRT updated Peugeot 405 T16 Pikes Peak - Data Replacement with a new update entry:

Assists disabled

Electronics.ini & Autoblip have been disabled.

Read the rest of this update entry...

FNNTRVRT · May 26, 2022

FNNTRVRT updated Peugeot 405 T16 Pikes Peak - Data Replacement with a new update entry:

fuel_cons.ini added & slowed down shift_animation

Added missing fuel_cons.ini and slowed down shift_animation by 10%.

Read the rest of this update entry...

Ludenation · May 28, 2022

Where can I get the orginal mod to add this datareplacement?

FNNTRVRT · May 29, 2022

Ludenation said:
Where can I get the orginal mod to add this datareplacement?

Download link is included in the readme file.

Ludenation · May 29, 2022

FNNTRVRT said:
Download link is included in the readme file.

Thank you

FNNTRVRT · Sep 11, 2022

FNNTRVRT updated Peugeot 405 T16 Pikes Peak - Data Replacement with a new update entry:

Analog_Instruments Fixed

Analog_Instruments have been adjusted to proper 8000rpm.

Read the rest of this update entry...

Raymond Racing · Sep 12, 2022

[Message Deleted]

Raymond Racing · Sep 12, 2022

Okay, to answer how you enable adjustable front-to-rear torque split in setup.ini, this is what I was able to find out:

[AWD_FRONT_TORQUE_DISTRIBUTION]
SHOW_CLICKS=0
TAB=DRIVETRAIN
MIN=(insert lowest frontward bias, minimum 0)
MAX=(insert highest frontward bias, maximum 100)
STEP=(how many units the menu arrows adjust value by)
POS_X=(position in setup menu page on X axis)
POS_Y=(ditto on Y axis)
HELP=

FNNTRVRT · Sep 13, 2022

FNNTRVRT updated Peugeot 405 T16 Pikes Peak - Data Replacement with a new update entry:

Added adjustable front/rear power distribution

Thanks to @Raymond Racing, adjustable front to rear power distribution is now available.

Read the rest of this update entry...

FNNTRVRT · Sep 13, 2022

Raymond Racing said:
Okay, to answer how you enable adjustable front-to-rear torque split in setup.ini, this is what I was able to find out:
[AWD_FRONT_TORQUE_DISTRIBUTION] SHOW_CLICKS=0 TAB=DRIVETRAIN MIN=(insert lowest frontward bias, minimum 0) MAX=(insert highest frontward bias, maximum 100) STEP=(how many units the menu arrows adjust value by) POS_X=(position in setup menu page on X axis) POS_Y=(ditto on Y axis) HELP=

Appreciate it. Will be crediting you.

Raymond Racing · Sep 13, 2022

FNNTRVRT said:
Appreciate it. Will be crediting you.

Also noticed a slight discrepancy in the suspension setup for the car. The rear-left suspension is 20mm longer than the rear-right. Thankfully it's just a simple fix; just change the minimum rod length value on the rear-left suspension from -100 to +100 to match the rear-right.

FNNTRVRT · Sep 14, 2022

FNNTRVRT updated Peugeot 405 T16 Pikes Peak - Data Replacement with a new update entry:

Fixed setup.ini

Once again mega thanks to @Raymond Racing for noticing it. Slight discrepancy in the suspension setup fixed.

Read the rest of this update entry...

FNNTRVRT · Sep 14, 2022

Raymond Racing said:
Also noticed a slight discrepancy in the suspension setup for the car. The rear-left suspension is 20mm longer than the rear-right. Thankfully it's just a simple fix; just change the minimum rod length value on the rear-left suspension from -100 to +100 to match the rear-right.

Can't believe I missed that. Thanks again.

Perico Lospa · Sep 15, 2022

Noob question: where should I put your data ACD file, just inside the data folder of the car?

Thank you in advance...

FNNTRVRT · Sep 16, 2022

It is recommended to delete original data file and data.acd and replace it with the data.acd found in the mod. Place it in the car's folder. Not in the data folder.